Qualcomm Talos SoC contains single controller,
containing 2 I2C hosts.

Signed-off-by: Wenmeng Liu <redacted>
---
  arch/arm64/boot/dts/qcom/talos.dtsi | 72 +++++++++++++++++++++++++++++++++++++
  1 file changed, 72 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/talos.dtsi b/arch/arm64/boot/dts/qcom/talos.dtsi
index e1dfaff9b6bf8641b19a685e74d60ad4e1e99d41..461a39968d928260828993ff3549aa15fd1870df 100644
--- a/arch/arm64/boot/dts/qcom/talos.dtsi
+++ b/arch/arm64/boot/dts/qcom/talos.dtsi

@@ -1549,6 +1549,42 @@ tlmm: pinctrl@3100000 {
  			#interrupt-cells = <2>;
  			wakeup-parent = <&pdc>;
  
+			cci_default: cci0-default-state {
+				cci_i2c0_default: cci-i2c0-default-pins {
+					/* SDA, SCL */
+					pins = "gpio32", "gpio33";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				cci_i2c1_default: cci-i2c1-default-pins {
+					/* SDA, SCL */
+					pins = "gpio34", "gpio35";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci_sleep: cci-sleep-state {
+				cci_i2c0_sleep: cci-i2c0-sleep-state {
+					/* SDA, SCL */
+					pins = "gpio32", "gpio33";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				cci_i2c1_sleep: cci-i2c1-sleep-state {
+					/* SDA, SCL */
+					pins = "gpio34", "gpio35";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
  			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
  				pins = "gpio4", "gpio5";
  				function = "qup0";

@@ -3785,6 +3821,42 @@ videocc: clock-controller@ab00000 {
  			#power-domain-cells = <1>;
  		};
  
+		cci: cci@ac4a000 {
+			compatible = "qcom,sm6150-cci", "qcom,msm8996-cci";
+
+			reg = <0x0 0x0ac4a000  0x0 0x4000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+			clocks = <&camcc CAM_CC_SOC_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_CLK>;
+			clock-names = "soc_ahb",
+				      "cpas_ahb",
+				      "cci";
+			pinctrl-0 = <&cci_default>;
+			pinctrl-1 = <&cci_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
  		camss: isp@acb3000 {
  			compatible = "qcom,sm6150-camss";