[PATCH 2/5] dt-bindings: i2c: qcom-cci: Allow operating-points-v2
From: Konrad Dybcio <konradybcio@kernel.org>
Date: 2025-09-04 14:31:36
Also in:
linux-arm-msm, linux-i2c, lkml
Subsystem:
arm/qualcomm mailing list, i2c subsystem host drivers, open firmware and flattened device tree bindings, qualcomm i2c cci driver, the rest · Maintainers:
Andi Shyti, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Loic Poulain, Robert Foss, Linus Torvalds
From: Konrad Dybcio <redacted> An OPP table is necessary to express combined voltage and frequency requirements for the CCI hw block. Allow passing one, without requiring its presence. Signed-off-by: Konrad Dybcio <redacted> --- Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
index 73144473b9b24e574bfc6bd7d8908f2f3895e087..1bb9a70661a944c1bdc01d336475952221450dba 100644
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml@@ -54,6 +54,8 @@ properties: interrupts: maxItems: 1 + operating-points-v2: true + power-domains: maxItems: 1
--
2.51.0