On 16/08/2025 10:46, iuncuim wrote:

From: Mikhail Kalashnikov <redacted>

After adding the phy driver, we can also add phy node. In addition to the
clk and reset lines, the power domain PD_PCIE is declared in this node
according to the bsp dtb. So let's mention it. 
Currently, phy driver does not support role selection and only works in
USB3.0 mode.

Signed-off-by: Mikhail Kalashnikov <redacted>
---
 arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

Please organize your patches correctly. One DTS was in the middle of
patchset, other is at the end. They all must be at the end, because you
cannot have dependency of driver on DTS.

Best regards,
Krzysztof