[PATCH 3/7] phy: sun4i-usb: a523: add support for the USB2 PHY
From: iuncuim <hidden>
Date: 2025-08-16 08:47:54
Also in:
linux-arm-kernel, linux-clk, linux-phy, linux-sunxi, lkml
Subsystem:
generic phy framework, the rest · Maintainers:
Vinod Koul, Linus Torvalds
From: Mikhail Kalashnikov <redacted> Previously, USB PHY was compatible with D1 and did not require separatedata options. But now we need to add a third PHY, which makes it incompatible. The third PHY is used together with USB3/PCIe combophy with DWC3 controller. In the BSP code, the third PHY requires a separate glue driver, but it seems that it is not needed. Signed-off-by: Mikhail Kalashnikov <redacted> --- drivers/phy/allwinner/phy-sun4i-usb.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index 8873aed3a..bb79339f2 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c@@ -1025,6 +1025,15 @@ static const struct sun4i_usb_phy_cfg sun50i_h616_cfg = { .siddq_in_base = true, }; +static const struct sun4i_usb_phy_cfg sun55i_a523_cfg = { + .num_phys = 3, + .phyctl_offset = REG_PHYCTL_A33, + .dedicated_clocks = true, + .hci_phy_ctl_clear = PHY_CTL_SIDDQ, + .phy0_dual_route = true, + .siddq_in_base = true, +}; + static const struct of_device_id sun4i_usb_phy_of_match[] = { { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg }, { .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
@@ -1041,6 +1050,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = { .data = &sun50i_a64_cfg}, { .compatible = "allwinner,sun50i-h6-usb-phy", .data = &sun50i_h6_cfg }, { .compatible = "allwinner,sun50i-h616-usb-phy", .data = &sun50i_h616_cfg }, + { .compatible = "allwinner,sun55i-a523-usb-phy", .data = &sun55i_a523_cfg }, { .compatible = "allwinner,suniv-f1c100s-usb-phy", .data = &suniv_f1c100s_cfg }, { },
--
2.50.1