[PATCH 1/4] gpiolib: add support for bias pull disable
From: Nuno Sá <nuno.sa@analog.com>
Date: 2022-07-13 13:13:57
Also in:
linux-acpi, linux-gpio
Subsystem:
gpio subsystem, the rest · Maintainers:
Linus Walleij, Bartosz Golaszewski, Linus Torvalds
This change prepares the gpio core to look at firmware flags and set 'FLAG_BIAS_DISABLE' if necessary. It works in similar way to 'GPIO_PULL_DOWN' and 'GPIO_PULL_UP'. Signed-off-by: Nuno Sá <nuno.sa@analog.com> --- drivers/gpio/gpiolib.c | 8 ++++++-- include/linux/gpio/machine.h | 1 + 2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 9535f48e18d1..0692ec84d3b0 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c@@ -3945,9 +3945,11 @@ int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id, if (lflags & GPIO_OPEN_SOURCE) set_bit(FLAG_OPEN_SOURCE, &desc->flags); - if ((lflags & GPIO_PULL_UP) && (lflags & GPIO_PULL_DOWN)) { + if (((lflags & GPIO_PULL_UP) && (lflags & GPIO_PULL_DOWN)) || + ((lflags & GPIO_PULL_UP) && (lflags & GPIO_PULL_DISABLE)) || + ((lflags & GPIO_PULL_DOWN) && (lflags & GPIO_PULL_DISABLE))) { gpiod_err(desc, - "both pull-up and pull-down enabled, invalid configuration\n"); + "multiple pull-up, pull-down or pull-disable enabled, invalid configuration\n"); return -EINVAL; }
@@ -3955,6 +3957,8 @@ int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id, set_bit(FLAG_PULL_UP, &desc->flags); else if (lflags & GPIO_PULL_DOWN) set_bit(FLAG_PULL_DOWN, &desc->flags); + else if (lflags & GPIO_PULL_DISABLE) + set_bit(FLAG_BIAS_DISABLE, &desc->flags); ret = gpiod_set_transitory(desc, (lflags & GPIO_TRANSITORY)); if (ret < 0)
diff --git a/include/linux/gpio/machine.h b/include/linux/gpio/machine.h
index 4d55da28e664..0b619eb7ae83 100644
--- a/include/linux/gpio/machine.h
+++ b/include/linux/gpio/machine.h@@ -14,6 +14,7 @@ enum gpio_lookup_flags { GPIO_TRANSITORY = (1 << 3), GPIO_PULL_UP = (1 << 4), GPIO_PULL_DOWN = (1 << 5), + GPIO_PULL_DISABLE = (1 << 6), GPIO_LOOKUP_FLAGS_DEFAULT = GPIO_ACTIVE_HIGH | GPIO_PERSISTENT, };
--
2.37.0