[PATCH V3 net-next 4/4] net: phy: realtek: add delay to fix RXC generation issue
From: Joakim Zhang <hidden>
Date: 2021-06-08 03:16:23
Also in:
lkml, netdev
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
PHY will delay about 11.5ms to generate RXC clock when switching from power down to normal operation. Read/write registers would also cause RXC become unstable and stop for a while during this process. Realtek engineer suggests 15ms or more delay can workaround this issue. Signed-off-by: Joakim Zhang <redacted> --- drivers/net/phy/realtek.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 79dc55bb4091..1b844a06fe72 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c@@ -410,6 +410,19 @@ static int rtl8211f_config_init(struct phy_device *phydev) return genphy_soft_reset(phydev); } +static int rtl821x_resume(struct phy_device *phydev) +{ + int ret; + + ret = genphy_resume(phydev); + if (ret < 0) + return ret; + + msleep(20); + + return 0; +} + static int rtl8211e_config_init(struct phy_device *phydev) { int ret = 0, oldpage;
@@ -906,7 +919,7 @@ static struct phy_driver realtek_drvs[] = { .config_intr = &rtl8211f_config_intr, .handle_interrupt = rtl8211f_handle_interrupt, .suspend = genphy_suspend, - .resume = genphy_resume, + .resume = rtl821x_resume, .read_page = rtl821x_read_page, .write_page = rtl821x_write_page, }, {
--
2.17.1