[PATCH V2 net-next 4/4] net: phy: realtek: add delay to fix RXC generation issue
flat view
STALE1947d
From: Joakim Zhang <hidden>
Date: 2021-06-08 03:01:53
Also in:
lkml, netdev
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Revision v2 of 3 in this series.
Revisions (3)
- v1 [diff vs current]
- v2 current
- v3 [diff vs current]
PHY will delay about 11.5ms to generate RXC clock when switching from power down to normal operation. Read/write registers would also cause RXC become unstable and stop for a while during this process. Realtek engineer suggests 15ms or more delay can workaround this issue. Signed-off-by: Joakim Zhang <redacted> --- drivers/net/phy/realtek.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 79dc55bb4091..1b844a06fe72 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c@@ -410,6 +410,19 @@ static int rtl8211f_config_init(struct phy_device *phydev) return genphy_soft_reset(phydev); } +static int rtl821x_resume(struct phy_device *phydev) +{ + int ret; + + ret = genphy_resume(phydev); + if (ret < 0) + return ret; + + msleep(20); + + return 0; +} + static int rtl8211e_config_init(struct phy_device *phydev) { int ret = 0, oldpage;
@@ -906,7 +919,7 @@ static struct phy_driver realtek_drvs[] = { .config_intr = &rtl8211f_config_intr, .handle_interrupt = rtl8211f_handle_interrupt, .suspend = genphy_suspend, - .resume = genphy_resume, + .resume = rtl821x_resume, .read_page = rtl821x_read_page, .write_page = rtl821x_write_page, }, {
--
2.17.1