Re: [PATCH V3 net-next 1/4] dt-bindings: net: add dt binding for realtek rtl82xx phy
From: Rob Herring <robh@kernel.org>
Date: 2021-06-10 02:54:43
Also in:
lkml, netdev
On Tue, Jun 08, 2021 at 11:15:32AM +0800, Joakim Zhang wrote:
quoted hunk ↗ jump to hunk
Add binding for realtek rtl82xx phy. Signed-off-by: Joakim Zhang <redacted> --- .../bindings/net/realtek,rtl82xx.yaml | 45 +++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl82xx.yamldiff --git a/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml new file mode 100644 index 000000000000..bb94a2388520 --- /dev/null +++ b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml@@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0+ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek RTL82xx PHY + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Florian Fainelli <f.fainelli@gmail.com> + - Heiner Kallweit <hkallweit1@gmail.com> + +description: + Bindings for Realtek RTL82xx PHYs + +allOf: + - $ref: ethernet-phy.yaml# + +properties: + realtek,clkout-disable: + type: boolean + description: + Disable CLKOUT clock, CLKOUT clock default is enabled after hardware reset. + +
Extra blank line.
+ realtek,aldps-enable:
+ type: boolean
+ description:
+ Enable ALDPS mode, ALDPS mode default is disabled after hardware reset.
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ realtek,clkout-disable;
+ realtek,aldps-enable;The schema here will never be applied because there is nothing to match on to determine which nodes it is valid. This should have a compatible (because ethernet phys are not special). Rob