Re: [PATCH v6 5/6] PCI: fu740: Add SiFive FU740 PCIe host controller driver
From: Bjorn Helgaas <helgaas@kernel.org>
Date: 2021-05-04 13:46:38
Also in:
linux-clk, linux-pci, linux-riscv, lkml
On Tue, May 04, 2021 at 06:59:39PM +0800, Greentime Hu wrote:
quoted hunk ↗ jump to hunk
From: Paul Walmsley <redacted> Add driver for the SiFive FU740 PCIe host controller. This controller is based on the DesignWare PCIe core. Signed-off-by: Paul Walmsley <redacted> Co-developed-by: Henry Styles <redacted> Signed-off-by: Henry Styles <redacted> Co-developed-by: Erik Danie <redacted> Signed-off-by: Erik Danie <redacted> Co-developed-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: Greentime Hu <greentime.hu@sifive.com> --- drivers/pci/controller/dwc/Kconfig | 10 + drivers/pci/controller/dwc/Makefile | 1 + drivers/pci/controller/dwc/pcie-fu740.c | 309 ++++++++++++++++++++++++ 3 files changed, 320 insertions(+) create mode 100644 drivers/pci/controller/dwc/pcie-fu740.cdiff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig index 22c5529e9a65..255d43b1661b 100644 --- a/drivers/pci/controller/dwc/Kconfig +++ b/drivers/pci/controller/dwc/Kconfig@@ -318,4 +318,14 @@ config PCIE_AL required only for DT-based platforms. ACPI platforms with the Annapurna Labs PCIe controller don't need to enable this. +config PCIE_FU740 + bool "SiFive FU740 PCIe host controller" + depends on PCI_MSI_IRQ_DOMAIN + depends on SOC_SIFIVE || COMPILE_TEST + depends on GPIOLIB
1) I'm a little disappointed that I reported the build issue 6 days
ago when we were already in the merge window, and it's taken until
now to make some progress.
2) I would prefer not to depend on GPIOLIB because it reduces
compile-test coverage. For example, the x86_64 defconfig does not
enable GPIOLIB, so one must manually enable it to even be able to
enable PCIE_FU740.
Many other PCI controller drivers use GPIO, but no others depend on
GPIOLIB, so I infer that in the !GPIOLIB case, gpio/consumer.h
provides the stubs required for compile testing.
We could have a conversation about whether it's better to
explicitly depend on GPIOLIB here, or whether building a working
FU740 driver implicitly depends on GPIOLIB being selected
elsewhere. That implicit dependency *is* a little obscure, but I
think that's what other drivers currently do, and I'd like to do
this consistently unless there's a good reason otherwise.
Here are some examples of other drivers:
dwc/pci-dra7xx.c:
config PCI_DRA7XX_HOST
depends on SOC_DRA7XX || COMPILE_TEST
config SOC_DRA7XX
select ARCH_OMAP2PLUS
config ARCH_OMAP2PLUS
select GPIOLIB
dwc/pci-meson.c:
config PCI_MESON
# doesn't, but probably *should* depend on "ARCH_MESON || COMPILE_TEST"
menuconfig ARCH_MESON
select GPIOLIB
dwc/pcie-qcom.c:
config PCIE_QCOM
depends on OF && (ARCH_QCOM || COMPILE_TEST)
config ARCH_QCOM
select GPIOLIB
pcie-rockchip.c:
config PCIE_ROCKCHIP_HOST
depends on ARCH_ROCKCHIP || COMPILE_TEST
config ARCH_ROCKCHIP
select GPIOLIB
+ select PCIE_DW_HOST + help + Say Y here if you want PCIe controller support for the SiFive + FU740. + endmenu