[PATCH v6 6/6] riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC
From: Greentime Hu <greentime.hu@sifive.com>
Date: 2021-05-04 11:00:57
Also in:
linux-clk, linux-pci, linux-riscv, lkml
Subsystem:
risc-v architecture, risc-v misc soc support, the rest · Maintainers:
Paul Walmsley, Palmer Dabbelt, Albert Ou, Conor Dooley, Linus Torvalds
Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Acked-by: Palmer Dabbelt <redacted> --- arch/riscv/boot/dts/sifive/fu740-c000.dtsi | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+)
diff --git a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
index eeb4f8c3e0e7..8eef82e4199f 100644
--- a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi@@ -159,6 +159,7 @@ prci: clock-controller@10000000 { reg = <0x0 0x10000000 0x0 0x1000>; clocks = <&hfclk>, <&rtcclk>; #clock-cells = <1>; + #reset-cells = <1>; }; uart0: serial@10010000 { compatible = "sifive,fu740-c000-uart", "sifive,uart0";
@@ -289,5 +290,37 @@ gpio: gpio@10060000 { clocks = <&prci PRCI_CLK_PCLK>; status = "disabled"; }; + pcie@e00000000 { + compatible = "sifive,fu740-pcie"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + reg = <0xe 0x00000000 0x0 0x80000000>, + <0xd 0xf0000000 0x0 0x10000000>, + <0x0 0x100d0000 0x0 0x1000>; + reg-names = "dbi", "config", "mgmt"; + device_type = "pci"; + dma-coherent; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x60080000 0x0 0x60080000 0x0 0x10000>, /* I/O */ + <0x82000000 0x0 0x60090000 0x0 0x60090000 0x0 0xff70000>, /* mem */ + <0x82000000 0x0 0x70000000 0x0 0x70000000 0x0 0x1000000>, /* mem */ + <0xc3000000 0x20 0x00000000 0x20 0x00000000 0x20 0x00000000>; /* mem prefetchable */ + num-lanes = <0x8>; + interrupts = <56>, <57>, <58>, <59>, <60>, <61>, <62>, <63>, <64>; + interrupt-names = "msi", "inta", "intb", "intc", "intd"; + interrupt-parent = <&plic0>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &plic0 57>, + <0x0 0x0 0x0 0x2 &plic0 58>, + <0x0 0x0 0x0 0x3 &plic0 59>, + <0x0 0x0 0x0 0x4 &plic0 60>; + clock-names = "pcie_aux"; + clocks = <&prci PRCI_CLK_PCIE_AUX>; + pwren-gpios = <&gpio 5 0>; + reset-gpios = <&gpio 8 0>; + resets = <&prci 4>; + status = "okay"; + }; }; };
--
2.31.1