[PATCH v5 05/11] dt-bindings: interrupt-controller: Add Loongson-3 HTPIC
From: Jiaxun Yang <jiaxun.yang@flygoat.com>
Date: 2020-03-18 06:25:16
Also in:
linux-mips, lkml
Subsystem:
irqchip drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Thomas Gleixner, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Document Loongson-3 HyperTransport PIC controller. Co-developed-by: Huacai Chen <redacted> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Rob Herring <robh@kernel.org> --- .../interrupt-controller/loongson,htpic.yaml | 59 +++++++++++++++++++ 1 file changed, 59 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml
new file mode 100644
index 000000000000..c8861cbbb8b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml@@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/interrupt-controller/loongson,htpic.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Loongson-3 HyperTransport Interrupt Controller + +maintainers: + - Jiaxun Yang <jiaxun.yang@flygoat.com> + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +description: | + This interrupt controller is found in the Loongson-3 family of chips to transmit + interrupts from PCH PIC connected on HyperTransport bus. + +properties: + compatible: + const: loongson,htpic-1.0 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 4 + description: | + Four parent interrupts that receive chained interrupts. + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + htintc: interrupt-controller@1fb000080 { + compatible = "loongson,htintc-1.0"; + reg = <0xfb000080 0x40>; + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&liointc>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>, + <25 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>; + }; +...
--
2.26.0.rc2