Thread (175 messages) 175 messages, 11 authors, 2020-03-25

Re: [PATCH v4 07/10] dt-bindings: mips: Add loongson boards

From: Rob Herring <robh@kernel.org>
Date: 2020-02-26 16:52:16
Also in: linux-mips, lkml

On Fri, Feb 21, 2020 at 01:09:22PM +0800, Jiaxun Yang wrote:
quoted hunk ↗ jump to hunk
Prepare for later dts.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
 .../bindings/mips/loongson/devices.yaml       | 29 +++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mips/loongson/devices.yaml
diff --git a/Documentation/devicetree/bindings/mips/loongson/devices.yaml b/Documentation/devicetree/bindings/mips/loongson/devices.yaml
new file mode 100644
index 000000000000..32bec784da87
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/loongson/devices.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/loongson/devices.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson based Platforms Device Tree Bindings
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+description: |
+  Devices with a Loongson CPU shall have the following properties.
Perhaps some details about the platform.
+  Note that generic device is used for built-in dtbs and will be
+  patched during boot on firmware without OF support.
That's a kernel detail that doesn't belong here. (BTW, built-in dtb 
support is intended as a transition step for bootloaders without dtb 
knowledge. It's not the recommended way and shouldn't be used on new 
platforms).
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: Generic Loongson3 4Core + RS780E
+        items:
+          - const: loongson,loongson3-4core-rs780e
+
+      - description: Generic Loongson3 8Core + RS780E
+        items:
+          - const: loongson,loongson3-8core-rs780e
+...
-- 
2.25.0
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help