Thread (17 messages) 17 messages, 3 authors, 2020-02-24

Re: [PATCH v5 2/6] Bindings: nvmem: add bindings for JZ4780 efuse

From: Andreas Kemnade <andreas@kemnade.info>
Date: 2020-02-24 07:38:15
Also in: linux-mips, lkml

On Sat, 22 Feb 2020 17:34:06 +0100
"H. Nikolaus Schaller" [off-list ref] wrote:
quoted
Am 22.02.2020 um 16:57 schrieb Andreas Kemnade [off-list ref]:

On Sat, 22 Feb 2020 11:25:37 +0100
"H. Nikolaus Schaller" [off-list ref] wrote:
  
quoted
From: PrasannaKumar Muralidharan <redacted>

This patch brings support for the JZ4780 efuse. Currently it only exposes
a read only access to the entire 8K bits efuse memory.

Tested-by: Mathieu Malaterre <redacted>
Signed-off-by: PrasannaKumar Muralidharan <redacted>
Signed-off-by: Mathieu Malaterre <redacted>
Signed-off-by: H. Nikolaus Schaller <redacted>
[converted to yaml]
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
.../bindings/nvmem/ingenic,jz4780-efuse.yaml  | 50 +++++++++++++++++++
1 file changed, 50 insertions(+)
create mode 100644 Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml
diff --git a/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml
new file mode 100644
index 000000000000..09a8ef937750
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/ingenic,jz4780-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ EFUSE driver bindings
+
+maintainers:
+  - PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - ingenic,jz4780-efuse
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    # Handle for the ahb for the efuse.
+    maxItems: 1
+
+  clock-names:
+   items:
+     - const:  ahb2  
as Rob said: probably not needed, since it is a single
clock, and the driver uses devm_clk_get(dev, NULL), so it should be prepared
for that without any extra work.  
The question is if a specific driver implementation should determine
what the DT requires or the other way round. I don't know...

I did interpret Rob's comment differently: there was
quoted
- "clock-names"		Must be "bus_clk"  
and he did say: 

	'clk' is redundant. How about 'ahb'?

So I thought he refers to the _clk suffix?
quoted
  
quoted
+
+required:
+  - compatible
+  - reg
+  - clock-names  
so it is not required here (but "- clocks" (not "- clock") as said in earlier
mail).  
Well, this is another example where I do not yet see any improvement by yaml.
It is the same amount of guessing what should be written where. Is this to
be added or not? When is it and why, when not and why?
well, this is the list of required properties which have to be an any
devicetree using that device, the conversion of the comments for the properties
in the .txt-file.
So, if you do not declare a property before, you cannot specify that it is
required. So if we drop the definition of clock-names we cannot declare it
as required. 

Regards,
Andreas

Attachments

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help