* no longer RFC but PATCH
* add yaml bindings (by Andreas Kemnade [off-list ref])
* fixes to yaml (suggested by Rob Herring [off-list ref])
RFC V4 2020-02-17 17:55:35:
* removed read_only for nvmem config because there is no write method
* Kconfig: replaced depends MACH_JZ4780 with MACH_INGENIC
* run through checkpatch and fixed issues
* made use of devm_nvram_register() and get rid of jz4780_efuse_remove()
(suggested by Srinivas Kandagatla [off-list ref])
* squashed previous patch 1/9 and 2/9 into single (regmap based) driver
RFC V3 2020-02-16 20:20:59:
This series is based on and a follow up for
https://lore.kernel.org/patchwork/cover/868157/
("[v2,0/2] Add efuse driver for Ingenic JZ4780 SoC")
Original authors were
PrasannaKumar Muralidharan [off-list ref]
Mathieu Malaterre [off-list ref]
and there are additions / code improvements by
H. Nikolaus Schaller [off-list ref]
Paul Cercueil [off-list ref]
This setup works, if the dm9000 driver is compiled
as a module.
Therefore it is all RFC level. It is also not completely
checkpatched.
H. Nikolaus Schaller (1):
MIPS: DTS: CI20: make DM9000 Ethernet controller use NVMEM to find the
default MAC address
PrasannaKumar Muralidharan (5):
nvmem: add driver for JZ4780 efuse
Bindings: nvmem: add bindings for JZ4780 efuse
Documentation: ABI: nvmem: add documentation for JZ4780 efuse ABI
nvmem: MAINTAINERS: add maintainer for JZ4780 efuse driver
MIPS: DTS: JZ4780: define node for JZ4780 efuse
.../ABI/testing/sysfs-driver-jz4780-efuse | 16 ++
.../bindings/nvmem/ingenic,jz4780-efuse.yaml | 50 ++++
MAINTAINERS | 5 +
arch/mips/boot/dts/ingenic/ci20.dts | 3 +
arch/mips/boot/dts/ingenic/jz4780.dtsi | 17 +-
drivers/nvmem/Kconfig | 10 +
drivers/nvmem/Makefile | 2 +
drivers/nvmem/jz4780-efuse.c | 229 ++++++++++++++++++
8 files changed, 331 insertions(+), 1 deletion(-)
create mode 100644 Documentation/ABI/testing/sysfs-driver-jz4780-efuse
create mode 100644 Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml
create mode 100644 drivers/nvmem/jz4780-efuse.c
--
2.23.0