Re: [PATCH v3 25/30] ARM: dts: sun8i: h3: add thermal zone to H3

This patch adds the thermal zones to the H3. We have only one sensor and
that is placed in the cpu.

Signed-off-by: Philipp Rossak <redacted>
---
 arch/arm/boot/dts/sun8i-h3.dtsi    | 31 +++++++++++++++++++++++++++++++
 arch/arm/boot/dts/sunxi-h3-h5.dtsi |  1 +
 2 files changed, 32 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 5b7994cb1471..954848d5df50 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi

@@ -78,6 +78,8 @@
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
 			#cooling-cells = <2>;
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
 		};
 
 		cpu@1 {

@@ -102,6 +104,35 @@
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&ths>;
+
+			trips {
+				cpu_hot_trip: cpu-warm {
+					temperature = <65000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_very_hot_trip: cpu-very-hot {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};