quoted

quoted

+	cmd |= FIELD_PREP(I2C_CMD_ADDR, msg->addr >> 1);

I just noticed this and wonder: Don't you need the LSB of the address?
It is not the RW flag, this is encoded in msg->flags.

So, the hardware interprets the LSB as the RW flag. It wouldn't be possible
to have a device addressed with the LSB set on this I2C master.

But msg->addr is 7 bit and LSB aligned. If I am not horribly wrong, with
the above code, an EEPROM at 0x50 would show up as 0x28 with your
driver?

Indeed, real 10-bit addresses require some additional manipulation of this
I2C master in order to work. We don't support it right now.

Then you should remove the associated FUNC flag.