[PATCH v2 18/23] dt-bindings: thermal: armada: add reference to new bindings
From: Miquel Raynal <miquel.raynal@bootlin.com>
Date: 2018-06-25 15:12:34
Also in:
linux-arm-kernel, linux-pm
Subsystem:
open firmware and flattened device tree bindings, the rest, thermal · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Rafael J. Wysocki, Daniel Lezcano
New bindings (with the syscon and the overheat interrupt) are available for AP806 and CP110 compatibles. Add a reference to these files from the original documentation. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- Documentation/devicetree/bindings/thermal/armada-thermal.txt | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
index e0d013a2e66d..f3b441100890 100644
--- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt@@ -10,6 +10,11 @@ Required properties: * marvell,armada-ap806-thermal * marvell,armada-cp110-thermal +Note: these bindings are deprecated for AP806/CP110 and should instead +follow the rules described in: +Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt +Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt + - reg: Device's register space. Two entries are expected, see the examples below. The first one points to the status register (4B). The second one points to the control
--
2.14.1