With genpd now expecting powerdomain drivers supporting performance
state to support get/set performance state callbacks, add support for it
in the rpmpd driver.

Signed-off-by: Rajendra Nayak <redacted>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/soc/qcom/rpmpd.c | 42 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/drivers/soc/qcom/rpmpd.c b/drivers/soc/qcom/rpmpd.c
index c8754d867c33..4058c5b450c6 100644
--- a/drivers/soc/qcom/rpmpd.c
+++ b/drivers/soc/qcom/rpmpd.c

@@ -14,6 +14,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/pm_opp.h>
 #include <linux/soc/qcom/smd-rpm.h>
 
 #include <dt-bindings/mfd/qcom-rpm.h>

@@ -29,6 +30,8 @@
 #define KEY_ENABLE		0x6e657773 /* swen */
 #define KEY_FLOOR_CORNER	0x636676   /* vfc */
 
+#define MAX_RPMPD_STATE		6
+
 #define DEFINE_RPMPD_CORN_SMPA(_platform, _name, _active, r_id)		\
 	static struct rpmpd _platform##_##_active;			\
 	static struct rpmpd _platform##_##_name = {			\

@@ -222,6 +225,43 @@ static int rpmpd_power_off(struct generic_pm_domain *domain)
 	return ret;
 }
 
+static int rpmpd_set_performance(struct generic_pm_domain *domain,
+			     unsigned int state)
+{
+	int ret = 0;
+	struct rpmpd *pd = domain_to_rpmpd(domain);
+
+	mutex_lock(&rpmpd_lock);
+
+	if (state > MAX_RPMPD_STATE)
+		goto out;
+
+	pd->corner = state;
+
+	if (!pd->enabled && (pd->key != KEY_FLOOR_CORNER))
+		goto out;
+
+	ret = rpmpd_aggregate_corner(pd);
+
+out:
+	mutex_unlock(&rpmpd_lock);
+
+	return ret;
+}
+
+static unsigned int rpmpd_get_performance(struct generic_pm_domain *genpd,
+					  struct dev_pm_opp *opp)
+{
+	struct device_node *np;
+	unsigned int corner = 0;
+
+	np = dev_pm_opp_get_of_node(opp);
+	of_property_read_u32(np, "qcom,level", &corner);

+	of_node_put(np);
+
+	return corner;
+}
+
 static int rpmpd_probe(struct platform_device *pdev)
 {
 	int i;

@@ -259,6 +299,8 @@ static int rpmpd_probe(struct platform_device *pdev)
 		rpmpds[i]->rpm = rpm;
 		rpmpds[i]->pd.power_off = rpmpd_power_off;
 		rpmpds[i]->pd.power_on = rpmpd_power_on;
+		rpmpds[i]->pd.set_performance_state = rpmpd_set_performance;
+		rpmpds[i]->pd.get_performance_state = rpmpd_get_performance;
 		pm_genpd_init(&rpmpds[i]->pd, NULL, true);
 
 		data->domains[i] = &rpmpds[i]->pd;