Hi Rob,

On Tue, Dec 5, 2017 at 9:57 AM, Geert Uytterhoeven [off-list ref] wrote:

On Mon, Dec 4, 2017 at 10:17 PM, Rob Herring [off-list ref] wrote:

quoted

On Mon, Dec 04, 2017 at 10:17:47AM +0100, Geert Uytterhoeven wrote:

quoted

On Thu, Nov 30, 2017 at 2:29 PM, Geert Uytterhoeven
[off-list ref] wrote:

quoted

Certain EEPROMS have a size that is larger than the number of address
bytes would allow, and store the MSB of the address in bit 3 of the
instruction byte.

This can be described in platform data using EE_INSTR_BIT3_IS_ADDR, or
in DT using the obsolete legacy "at25,addr-mode" property.
But currently there exists no non-deprecated way to describe this in DT.

Hence extend the existing "address-width" DT property to allow
specifying 9, 17, or 25 address bits, and enable support for that in the
driver.

Signed-off-by: Geert Uytterhoeven <redacted>
---
EEPROMs using 9 address bits are common (e.g. M95040, 25AA040/25LC040).
Do EEPROMs using 17 or 25 address bits, as mentioned in
include/linux/spi/eeprom.h, really exist?
Or should we just limit it to a single odd value (9 bits)?

At least for the real Atmel parts, only the AT25040 part uses odd (8 +
1 bit) addressing.

Seems like we should have a specific compatible for it.

Possibly. But currently all configuration is done through DT properties, not
through matching on compatible values.

Adding compatible values for all known/used parts could quickly become a
large table.
E.g. Atmel/Microchip has 3 variants of 512-byte EEPROMs: AT25040B,
25LC040A, and 25AA040A. The former uses an 8-byte pagesize, while the
latter parts use 16-byte pagesizes.
Not to mention "compatible" parts from other manufacturers, and all other
supported size.

Currently all of this is configured through the "pagesize", "size", and
"address-width" DT properties, with matching on generic "atmel,at25".

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html