On Fri, May 05, 2017 at 12:50:51AM +0800, icenowy@aosc.io wrote:

quoted

quoted

+void sun8i_mixer_layer_enable(struct sun8i_mixer *mixer,
+				int layer, bool enable)
+{
+	u32 val;
+	/* Currently the first UI channel is used */
+	int chan = mixer->cfg->vi_num;
+
+	DRM_DEBUG_DRIVER("Enabling layer %d in channel %d\n", layer, chan);
+
+	if (enable)
+		val = SUN8I_MIXER_CHAN_UI_LAYER_ATTR_EN;
+	else
+		val = 0;
+
+	regmap_update_bits(mixer->engine.regs,
+			   SUN8I_MIXER_CHAN_UI_LAYER_ATTR(chan, layer),
+			   SUN8I_MIXER_CHAN_UI_LAYER_ATTR_EN, val);
+
+	/* Set the alpha configuration */
+	regmap_update_bits(mixer->engine.regs,
+			   SUN8I_MIXER_CHAN_UI_LAYER_ATTR(chan, layer),
+			   SUN8I_MIXER_CHAN_UI_LAYER_ATTR_ALPHA_MODE_MASK,
+			   SUN8I_MIXER_CHAN_UI_LAYER_ATTR_ALPHA_MODE_DEF);
+	regmap_update_bits(mixer->engine.regs,
+			   SUN8I_MIXER_CHAN_UI_LAYER_ATTR(chan, layer),
+			   SUN8I_MIXER_CHAN_UI_LAYER_ATTR_ALPHA_MASK,
+			   SUN8I_MIXER_CHAN_UI_LAYER_ATTR_ALPHA_DEF);
+}

This one too.

It's called from sun8i_layer.c, so it cannot be static.

Fair enough.

quoted

quoted

+	/* Set base coordinates */
+	DRM_DEBUG_DRIVER("Layer coordinates X: %d Y: %d\n",
+			 state->crtc_x, state->crtc_y);
+	regmap_write(mixer->engine.regs,
+		     SUN8I_MIXER_CHAN_UI_LAYER_COORD(chan, layer),
+		     SUN8I_MIXER_COORD(state->crtc_x, state->crtc_y));

X and Y are fixed point numbers. You want to keep only the higher 16
bits there.

Do you mean "lower 16 bits"? Thus should I (x & 0xffff) or ((u16)x) ?

Nevermind, I got confused with src_x and src_y.

P.S. The negative coordinates are broken, how should I deal with it? or
is the coordinates promised to be not negative?

Adjust the buffer base address, and use a shorter line. You have such
an example in the sun4i code.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com