On 31/08/16 12:22, Mirza Krak wrote:
2016-08-30 19:06 GMT+02:00 Rob Herring [off-list ref]:
...
quoted
quoted
nvidia,snor-cs = <4>;
NAK, no custom CS properties.
Ok, so ...
gmi@70090000 {
compatible = "nvidia,tegra20-gmi";
reg = <0x70009000 0x1000>;
#address-cells = <2>;
#size-cells = <1>;
clocks = <&tegra_car TEGRA20_CLK_NOR>;
clock-names = "gmi";
resets = <&tegra_car 42>;
reset-names = "gmi";
ranges = <4 0 0xd0000000 0xfffffff>;
status = "okay";
bus@4,0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 4 0 0x40000>;
nvidia,snor-mux-mode;
nvidia,snor-adv-inv;
can@0 {
reg = <0 0x100>;
...
};
can@40000 {
reg = <0x40000 0x100>;
...
};
};
};
Have I understood you correct?
Also wanted to verify the example case where you only have on device
connected to one CS#, from what I see in other implementations it
seems OK to put the CS# in the reg property in that case. Is this
correct?
Example with one SJA1000 CAN controller connected to the GMI bus
on CS4:
gmi@70090000 {
compatible = "nvidia,tegra20-gmi";
reg = <0x70009000 0x1000>;
#address-cells = <2>;
#size-cells = <1>;
clocks = <&tegra_car TEGRA20_CLK_NOR>;
clock-names = "gmi";
resets = <&tegra_car 42>;
reset-names = "gmi";
ranges = <4 0 0xd0000000 0xfffffff>;
status = "okay";
can@4,0 {
reg = <4 0 0x100>;
nvidia,snor-mux-mode;
nvidia,snor-adv-inv;
...
};
};
Jon, to be able to handle both cases in the driver we would first
attempt to decode the CS# from the ranges property, and fallback to
reg property if no ranges are defined. Does that sound reasonable?
Given the above examples that may be supported, is there a
better/simpler way to extract the CS# than what Mirza is proposing? For
example, from the node-name unit-address?
Cheers
Jon
--
nvpublic
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html