2016-08-24 17:56 GMT+02:00 Jon Hunter [off-list ref]:
+
quoted
+Example with two SJA1000 CAN controllers connected to the GMI bus. We wrap the
+controllers with a simple-bus node since they are all connected to the same
+chip-select (CS4), in this example external address decoding is provided:
+
+gmi@70090000 {
+ compatible = "nvidia,tegra20-gmi";
+ reg = <0x70009000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&tegra_car TEGRA20_CLK_NOR>;
+ clock-names = "gmi";
+ resets = <&tegra_car 42>;
+ reset-names = "gmi";
+ ranges = <4 0x48000000 0x7ffffff>;
+
+ status = "disabled";
+
+ bus@4 {
+ compatible = "simple-bus";
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 4 0x40100>;
Does this work? I tried to add an example like this and I got ...
Warning (reg_format): "reg" property in /gmi@70009000/bus@4 has invalid
length (4 bytes) (#address-cells == 1, #size-cells == 1)
Shoot, to get rid of the warning it should be
reg = <4 0 >;
But it works either way.
I am wondering if we should just following the arm,pl172 example and
have ...
cs4 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
nvidia,snor-cs = <4>;
nvidia,snor-mux-mode;
nvidia,snor-adv-inv;
can@0 {
reg = <0 0x100>;
...
};
...
};
That means to go back to V1 really (almost :)). Which I do not mind.
Will give it a test run.
But I am a little hesitant if will be any better/cleaner. In your example above:
can@0 {
reg = <0 0x100>;
...
};
Would this really translate correctly? In the pl172 example they have
multiple ranges and address with "flash@0,0" which a range defined in
parent node. "can@0" does not have valid match in parent node in our
example. So I probably need add some more logic for it to properly
translate.
I have an idea which is following:
gmi@70090000 {
status = "okay";
#address-cells = <2>;
#size-cells = <1>;
ranges = <4 0 0x48000000 0x00040000>;
cs4 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges;
nvidia,snor-cs = <4>;
nvidia,snor-mux-mode;
nvidia,snor-adv-inv;
can@0 {
compatible = "nxp,sja1000";
reg = <4 0 0x100>;
...
};
can@40000 {
compatible = "nxp,sja1000";
reg = <4 0x40000 0x100>;
...
};
};
};
Do not know if above will work at all (not able to test at current
location), anyway I will play around with it some more and get back to
you.
Best Regards
Mirza