Thread (29 messages) 29 messages, 5 authors, 2015-12-11

Re: [PATCH 09/14] DEVICETREE: Add bindings for PIC32 usart driver

From: Joshua Henderson <hidden>
Date: 2015-12-11 16:09:36
Also in: linux-mips, lkml

Rob,

On 11/22/2015 02:56 PM, Rob Herring wrote:
On Fri, Nov 20, 2015 at 05:17:21PM -0700, Joshua Henderson wrote:
quoted
From: Andrei Pistirica <redacted>

Document the devicetree bindings for the USART peripheral found on
Microchip PIC32 class devices.

Signed-off-by: Andrei Pistirica <redacted>
Signed-off-by: Joshua Henderson <redacted>
---
 .../bindings/serial/microchip,pic32-usart.txt      |   29 ++++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/serial/microchip,pic32-usart.txt
diff --git a/Documentation/devicetree/bindings/serial/microchip,pic32-usart.txt b/Documentation/devicetree/bindings/serial/microchip,pic32-usart.txt
new file mode 100644
index 0000000..c87321c
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/microchip,pic32-usart.txt
@@ -0,0 +1,29 @@
+* Microchip Universal Synchronous Asynchronous Receiver/Transmitter (USART)
+
+Required properties:
+- compatible: Should be "microchip,pic32-usart"
Again, should be more specific.
Ack.  In addition, will replace all instances of USART with UART.
quoted
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt
+- pinctrl: Should contain pinctrl for TX/RX/RTS/CTS
+
+Optional properties:
+- microchip,uart-has-rtscts : Indicate the uart has hardware flow control
+- rts-gpios: RTS pin for USP-based UART if microchip,uart-has-rtscts
+- cts-gpios: CTS pin for USP-based UART if microchip,uart-has-rtscts
This appears to just be copied for Sirf UART.

Doesn't *-gpios being present imply having h/w 
flow-control (i.e. microchip,uart-has-rtscts)?

Rob
Agreed.  microchip,uart-has-rtscts will be dropped and it turns out we don't really need the rtc-gpios property.

Josh
quoted
+
+Example:
+	usart0: serial@1f822000 {
+		compatible = "microchip,pic32-usart";
+		reg = <0x1f822000 0x50>;
+		interrupts = <UART1_FAULT DEFAULT_INT_PRI IRQ_TYPE_NONE>,
+			     <UART1_RECEIVE_DONE DEFAULT_INT_PRI IRQ_TYPE_NONE>,
+			     <UART1_TRANSFER_DONE DEFAULT_INT_PRI IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <
+			&pinctrl_uart1
+			&pinctrl_uart1_cts
+			&pinctrl_uart1_rts>;
+		microchip,uart-has-rtscts;
+		cts-gpios = <&pioB 15 0>;
+		rts-gpios = <&pioD 1 0>;
+	};
-- 
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help