[PATCH-v3 08/11] Documentation: binding: add new property 'disable_after_xfer' to i2c-pxa
flat view
STALE4115d
SUPERSEDED
From: Vaibhav Hiremath <hidden>
Date: 2015-07-06 19:28:17
Also in:
linux-arm-kernel, linux-i2c, lkml
Subsystem:
i2c subsystem host drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andi Shyti, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v3 of 8 in this series.
Revisions (8)
Driver now supports enable/disable across msg xfer, which user can control it by new DT property - i2c-disable-after-xfer : If set, driver will disable I2C module after msg xfer and enable it back before xfer. Signed-off-by: Vaibhav Hiremath <redacted> --- Documentation/devicetree/bindings/i2c/i2c-pxa.txt | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt
index 12b78ac..9657db5 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt@@ -18,6 +18,11 @@ Recommended properties : status register of i2c controller instead. - mrvl,i2c-fast-mode : Enable fast mode of i2c controller. +Optional properties : + + - i2c-disable-after-xfer : If set, driver will disable I2C module + after msg xfer and enable it again before xfer. + Examples: twsi1: i2c@d4011000 { compatible = "mrvl,mmp-twsi";
--
1.9.1