[PATCH-v3 10/11] i2c: pxa: Add ILCR (tLow & tHigh) configuration support
flat view
STALE4116d
SUPERSEDED
From: Vaibhav Hiremath <hidden>
Date: 2015-07-06 19:28:30
Also in:
linux-arm-kernel, linux-i2c, lkml
Subsystem:
i2c subsystem, i2c subsystem host drivers, the rest · Maintainers:
Andi Shyti, Linus Torvalds
Revision v3 of 4 in this series.
Revisions (4)
- v1 [diff vs current]
- v2 [diff vs current]
- v3 current
- v4 [diff vs current]
With addition of PXA910 family of devices, the TWSI module supports SCL clock adjustment using ILCR register. This patch enables the control and configuration of ICLR through DT properties, i2c-sclk-high-time-ns: SCLK high time (tHigh), for standard/fast/high speed mode i2c-sclk-low-time-ns: SCLK low time (tLow), for standard/fast/high speed mode Note that in case of standard and fast mod, the tLow and tHigh counters are same, and software will use tLow value. Also, brought up devm_clk_get() fn above i2c_pxa_probe_dt(), as it uses clk rate for timing calculations. Signed-off-by: Vaibhav Hiremath <redacted> Signed-off-by: Jett.Zhou <redacted> Signed-off-by: Yi Zhang <redacted> --- drivers/i2c/busses/i2c-pxa.c | 68 +++++++++++++++++++++++++++++++++++++++----- 1 file changed, 61 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index d5cf6f5..537555a 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c@@ -195,6 +195,9 @@ struct pxa_i2c { unsigned long rate; bool highmode_enter; bool disable_after_xfer; + + unsigned int sclk_thigh_load_cnt; + unsigned int sclk_tlow_load_cnt; }; #define _IBMR(i2c) ((i2c)->reg_ibmr)
@@ -507,6 +510,33 @@ static void i2c_pxa_set_slave(struct pxa_i2c *i2c, int errcode) #define i2c_pxa_set_slave(i2c, err) do { } while (0) #endif +static void i2c_pxa_do_sclk_adj(struct pxa_i2c *i2c) +{ + unsigned int reg_ilcr; + + reg_ilcr = readl(_ILCR(i2c)); + + /* For standard/fast mode tlow and thigh counters are same */ + if (i2c->sclk_tlow_load_cnt) { + unsigned int mask, shift; + + mask = i2c->high_mode ? ILCR_HLVL_MASK : + i2c->fast_mode ? ILCR_FLV_MASK : ILCR_SLV_MASK; + shift = i2c->high_mode ? ILCR_HLVL_SHIFT : + i2c->fast_mode ? ILCR_FLV_SHIFT : ILCR_SLV_SHIFT; + + reg_ilcr &= ~mask; + reg_ilcr |= i2c->sclk_tlow_load_cnt << shift; + } + + if (i2c->high_mode && i2c->sclk_thigh_load_cnt) { + reg_ilcr &= ~ILCR_HLVH_MASK; + reg_ilcr |= i2c->sclk_thigh_load_cnt << ILCR_HLVH_SHIFT; + } + + writel(reg_ilcr, _ILCR(i2c)); +} + static void i2c_pxa_reset(struct pxa_i2c *i2c) { pr_debug("Resetting I2C Controller Unit\n");
@@ -526,6 +556,8 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c) writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c)); writel(readl(_ICR(i2c)) | (i2c->high_mode ? ICR_HS : 0), _ICR(i2c)); + i2c_pxa_do_sclk_adj(i2c); + #ifdef CONFIG_I2C_PXA_SLAVE dev_info(&i2c->adap.dev, "Enabling slave mode\n"); writel(readl(_ICR(i2c)) | ICR_SADIE | ICR_ALDIE | ICR_SSDIE, _ICR(i2c));
@@ -1198,6 +1230,26 @@ static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c, *i2c_types = (long)(of_id->data); + /* optional properties */ + if (of_device_is_compatible(np, "mrvl,mmp-twsi")) { + unsigned int tlow = 0, thigh = 0; + unsigned int clk_ns; + + /* clock time in nsec */ + clk_ns = 1000000 / (i2c->rate / 1000); + + of_property_read_u32(np, "i2c-sclk-high-time-ns", &thigh); + i2c->sclk_thigh_load_cnt = thigh / clk_ns; + + of_property_read_u32(np, "i2c-sclk-low-time-ns", &tlow); + i2c->sclk_tlow_load_cnt = tlow / clk_ns; + + /* For std/fast mode tlow & thigh have same bit-fields */ + if (!i2c->high_mode && + (i2c->sclk_tlow_load_cnt != i2c->sclk_thigh_load_cnt)) + dev_warn(&i2c->adap.dev, + "mismatch of tLow & tHigh values, using tLow\n"); + } return 0; }
@@ -1247,6 +1299,15 @@ static int i2c_pxa_probe(struct platform_device *dev) return irq; } + i2c->clk = devm_clk_get(&dev->dev, NULL); + if (IS_ERR(i2c->clk)) { + dev_err(&dev->dev, "failed to get the clk: %ld\n", + PTR_ERR(i2c->clk)); + return PTR_ERR(i2c->clk); + } + + i2c->rate = clk_get_rate(i2c->clk); + /* Default adapter num to device id; i2c_pxa_probe_dt can override. */ i2c->adap.nr = dev->id;
@@ -1264,13 +1325,6 @@ static int i2c_pxa_probe(struct platform_device *dev) strlcpy(i2c->adap.name, "pxa_i2c-i2c", sizeof(i2c->adap.name)); - i2c->clk = devm_clk_get(&dev->dev, NULL); - if (IS_ERR(i2c->clk)) { - dev_err(&dev->dev, "failed to get the clk: %ld\n", - PTR_ERR(i2c->clk)); - return PTR_ERR(i2c->clk); - } - i2c->reg_base = devm_ioremap_resource(&dev->dev, res); if (IS_ERR(i2c->reg_base)) { dev_err(&dev->dev, "failed to map resource: %ld\n",
--
1.9.1