Re: [PATCH v2 00/11] ARM: dts: zynq: Prepare Parallella

On 10/21/2014 11:18 PM, Olof Johansson wrote:

On Tue, Oct 21, 2014 at 2:07 PM, Andreas Färber [off-list ref] wrote:

quoted

Am 21.10.2014 um 23:01 schrieb Olof Johansson:

quoted

On Tue, Oct 21, 2014 at 1:52 PM, Andreas Färber [off-list ref] wrote:

quoted

Am 18.10.2014 um 06:28 schrieb Olof Johansson:

quoted

I did a test run with yesterday's -next It looks like networking isn't
working there at the moment, clock related. Same happens with 3.17 and
latest mainline, config multi_v7_defconfig:

[WARN] [    7.943648] macb e000b000.ethernet eth0: unable to generate
target frequency: 125000000 Hz
[WARN] [   10.948681] macb e000b000.ethernet eth0: unable to generate
target frequency: 125000000 Hz

I am unable to reproduce this in my setup - at Linus' tip
c2661b806092d8ea2dccb7b02b65776555e0ee47 (v3.18-rc1-68-gc2661b8), make
oldconfig'ing my /proc/config.gz.

Sören, in light of your explanations, should I be expecting problems
with 1GbE or with 100MbE? My board is connected to a 1GbE switch.

My board might have old firmware/bitstream on it? It reports as:

U-Boot 2012.10-00003-g792c31c (Jan 03 2014 - 12:24:08)

Mine reports the same version.

sha512sum of non-headless bitstream:
decb37222a7da0de39b1c1eb95714500cc006506cc86d85ed9c6c7b30c7cd7b91ef3592b886311f4285b5ce0079b4ffcd83f91ae275435ac15cefefe7db00b08
 /mnt/parallella.bit.bin

Mine is booting with whatever bitstream is flashed, and i'm not sure
how to actually look at what that is.

'fpga dump 0 0x10000000 0x1000000' doesn't do what I expect it to
(target memory isn't modified).

Dumping bitstream is not supported in u-boot that's why it won't work.

I have tested the board I have here and no problem to run at 100 or 1000Mbit/s.

[  188.898563] macb e000b000.ethernet eth0: link down
[  192.898600] macb e000b000.ethernet eth0: link up (1000/Full)
[  708.898556] macb e000b000.ethernet eth0: link down
[  715.898696] macb e000b000.ethernet eth0: link up (100/Full)
[  749.909764] macb e000b000.ethernet eth0: link down
[  761.915769] macb e000b000.ethernet eth0: link up (1000/Full)

I will send you my boot.bin in private email which you can try.

Thanks,
Michal






_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel