[PATCH v7 6/7] ARM: berlin: add the AHCI node for the BG2Q
From: Antoine Ténart <hidden>
Date: 2014-06-23 13:40:54
Also in:
linux-arm-kernel, linux-ide, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
The BG2Q has an AHCI SATA controller. Add the corresponding nodes (AHCI, PHY) into its device tree. Signed-off-by: Antoine Ténart <redacted> --- arch/arm/boot/dts/berlin2q.dtsi | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 635a16a64cb4..60974dabedbc 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi@@ -303,6 +303,35 @@ clock-names = "refclk"; }; + ahci: sata@e90000 { + compatible = "generic-ahci"; + reg = <0xe90000 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&chip CLKID_SATA>; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy 0>; + status = "disabled"; + }; + + sata1: sata-port@1 { + reg = <1>; + phys = <&sata_phy 1>; + status = "disabled"; + }; + }; + + sata_phy: phy@e900a0 { + compatible = "marvell,berlin2q-sata-phy"; + reg = <0xe900a0 0x200>; + clocks = <&chip CLKID_SATA>; + #phy-cells = <1>; + status = "disabled"; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>;
--
1.9.1