Hi Guenter,
On Nov 6, 2013, at 11:17 PM, Guenter Roeck wrote:
On Wed, Nov 06, 2013 at 09:38:21PM +0100, Sebastian Andrzej Siewior wrote:
quoted
On 06.11.13, Guenter Roeck wrote:
quoted
At least that is our use case. u-boot doesn't know which cards are going to be
inserted at runtime. Even PCIe hotplug itself is insufficient, as the PCIe
configuration differs per card, and the cards support a variety of i2c devices
as well as other card specific devices such LEDs and multi-function FPGAs.
So you have your FPGA behind PCIe and you use the DT to describe the
chips behind i2c? And then you update your FPGA and want update the
devices in DT without reboot?
No.
We have a variety of boards ...
[snip]
TL;DR the real world...
We use DT overlays to describe the hardware on those boards and, if necessary,
its configuration. For example, if there is a PCIe switch, the overlay would
describe its memory and bus number configuration.
Guenter
Glad it's been useful...
Regards
-- Pantelis--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html