On Tue, Nov 5, 2013 at 12:41 PM, Pantelis Antoniou
[off-list ref] wrote:
Add a runtime interface to /proc to enable generic device tree overlay
usage.
Two new /proc files are added:
/proc/device-tree-overlay & /proc/device-tree-overlay-status
I think we really want all this to live under sysfs. Grant did patches
to move /proc/device-tree to /sys, but it never went upstream:
v2: https://lkml.org/lkml/2013/3/21/215
v1: https://lkml.org/lkml/2013/3/20/311
/proc/device-tree-overlay accepts a stream of a device tree objects and
applies it to the running kernel's device tree.
$ cat ~/BB-UART2-00A0.dtbo >device-tree-overlay
overlay_proc_release: Applied #2 overlay segments @0
/proc/device-tree-overlay-status displays the the overlays added using
the /proc interface
$ cat device-tree-overlay-status
0: 861 bytes BB-UART2:00A0
Is the size useful information?
The format of the status line is
<ID>: <SIZE> bytes <part-number>:<version>
<ID> is the id of the overlay
<SIZE> is the size of the overlay in bytes
<part-number>, <version> are (optional) root level properties of the DTBO
You can remove an overlay by echoing the <ID> number of the overlay
precedded with a '-'
So
$ echo "-0" >device-tree-overlay-status
Removes the overlay.
This interface seems racy. Could the id change on you between reading
the status and echoing to remove the overlay?
I would rather see a file created for each overlay and simply echo 0
or "remove" to remove the overlay. Or possibly it needs to be a
directory per overlay with several files for info and control. This
would be more inline with typical sysfs design.
Rob