Re: [PATCH v8 01/40] x86/compressed/64: detect/setup SEV/SME features earlier in boot

@@ -447,6 +446,23 @@ SYM_CODE_START(startup_64)
 	call	load_stage1_idt
 	popq	%rsi
 
+#ifdef CONFIG_AMD_MEM_ENCRYPT

+	/*
+	 * Now that the stage1 interrupt handlers are set up, #VC exceptions from
+	 * CPUID instructions can be properly handled for SEV-ES guests.
+	 *
+	 * For SEV-SNP, the CPUID table also needs to be set up in advance of any
+	 * CPUID instructions being issued, so go ahead and do that now via
+	 * sev_enable(), which will also handle the rest of the SEV-related
+	 * detection/setup to ensure that has been done in advance of any dependent
+	 * code.
+	 */
+	pushq	%rsi
+	movq	%rsi, %rdi		/* real mode address */
+	call	sev_enable
+	popq	%rsi
+#endif
+
 	/*
 	 * paging_prepare() sets up the trampoline and checks if we need to
 	 * enable 5-level paging.

+void sev_enable(struct boot_params *bp)
+{
+	unsigned int eax, ebx, ecx, edx;
+
+	/* Check for the SME/SEV support leaf */
+	eax = 0x80000000;
+	ecx = 0;
+	native_cpuid(&eax, &ebx, &ecx, &edx);
+	if (eax < 0x8000001f)
+		return;
+
+	/*
+	 * Check for the SME/SEV feature:
+	 *   CPUID Fn8000_001F[EAX]
+	 *   - Bit 0 - Secure Memory Encryption support
+	 *   - Bit 1 - Secure Encrypted Virtualization support
+	 *   CPUID Fn8000_001F[EBX]
+	 *   - Bits 5:0 - Pagetable bit position used to indicate encryption
+	 */
+	eax = 0x8000001f;
+	ecx = 0;
+	native_cpuid(&eax, &ebx, &ecx, &edx);
+	/* Check whether SEV is supported */
+	if (!(eax & BIT(1)))
+		return;
+
+	/* Set the SME mask if this is an SEV guest. */
+	sev_status   = rd_sev_status_msr();
+

+	if (!(sev_status & MSR_AMD64_SEV_ENABLED))
+		return;
+
+	sme_me_mask = BIT_ULL(ebx & 0x3f);
+}

--