[PATCH v2 2/3] Bluetooth: hci_h5: btrtl: Maintain flow control if wakeup is enabled
From: Archie Pusaka <hidden>
Date: 2021-07-15 14:52:15
Also in:
lkml
Subsystem:
bluetooth drivers, the rest · Maintainers:
Marcel Holtmann, Luiz Augusto von Dentz, Linus Torvalds
From: Archie Pusaka <redacted> For chips that doesn't reset on suspend, we need to provide the correct value of flow_control when it resumes. Therefore, store the flow control value when reading from the config file to be reused upon suspend. Signed-off-by: Archie Pusaka <redacted> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Hilda Wu <redacted> --- (no changes since v1) drivers/bluetooth/hci_h5.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index fd672111a048..cbc63b057f33 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c@@ -54,6 +54,7 @@ enum { H5_RX_ESC, /* SLIP escape mode */ H5_TX_ACK_REQ, /* Pending ack to send */ H5_WAKEUP_DISABLE, /* Device cannot wake host */ + H5_HW_FLOW_CONTROL, /* Use HW flow control */ }; struct h5 {
@@ -920,6 +921,9 @@ static int h5_btrtl_setup(struct h5 *h5) serdev_device_set_baudrate(h5->hu->serdev, controller_baudrate); serdev_device_set_flow_control(h5->hu->serdev, flow_control); + if (flow_control) + set_bit(H5_HW_FLOW_CONTROL, &h5->flags); + err = btrtl_download_firmware(h5->hu->hdev, btrtl_dev); /* Give the device some time before the hci-core sends it a reset */ usleep_range(10000, 20000);
@@ -1012,7 +1016,11 @@ static int h5_btrtl_resume(struct h5 *h5) queue_work(system_long_wq, &reprobe->work); } else { gpiod_set_value_cansleep(h5->device_wake_gpio, 1); + + if (test_bit(H5_HW_FLOW_CONTROL, &h5->flags)) + serdev_device_set_flow_control(h5->hu->serdev, true); } + return 0; }
--
2.32.0.93.g670b81a890-goog