|
[PATCH v2 0/1] Bluetooth: fix stack OOB write in the legacy adv data path
Piyus Kedia
|
2 |
|
[PATCH 0/2] Use platform Bluetooth addresses on Broadcom UART controllers
Linus Walleij
|
4 |
|
[PATCH v7 0/8] arm64: dts: monaco-arduino-monza: Add support for LGA WiFi/BT module
Loic Poulain
PENDING · 7 of 8 reviewed
|
1 |
|
[PATCH 0/2] Bluetooth for the RTL8852BS on BPI-F3
Frédéric Mahé
|
5 |
|
[PATCH BlueZ v8 00/11] Add support for HDT and EKS
Luiz Augusto von Dentz
|
12 |
|
[PATCH v1 0/2] obexd/pbap: Report NewMissedCalls for mch
Jinwang Li
|
1 |
|
Re: [BUG] Bluetooth: stack out-of-bounds write in eir_create_adv_data() and eir_create_scan_rsp() when a controller stops reporting LE Extended Advertising (seen on 7.3.1)
Luiz Augusto von Dentz
|
1 |
|
[PATCH v2 0/6] Bluetooth: qca: enable QCC2072 on RB3 Gen 2 Industrial
Rahul Samana
|
1 |
|
[PATCH BlueZ] bearer: Fix Connect refused as in progress after a failed attempt
Kevin Dewald
|
2 |
|
[PATCH BlueZ v1 00/10] shared/gatt: Use util_iov helpers for PDU handling
Luiz Augusto von Dentz
|
2 |
|
[PATCH] Bluetooth: hci_qca: clear qca_memdump when discarding dump packets
Joas Antonio dos Santos via B4 Relay
|
2 |
|
[PATCH] Bluetooth: vhci: Flush suspend work after removing debugfs
Cen Zhang
|
2 |
|
[PATCH] Bluetooth: hci_conn: Initialize the device before hash insertion
Cen Zhang
|
1 |
|
[PATCH bluetooth-next v2] Bluetooth: L2CAP: validate MPS and MTU in ECRED connection response
Joas Antonio dos Santos via B4 Relay
|
2 |
|
[PATCH v2] Bluetooth: L2CAP: Protect the receive reject-list lookup
Cen Zhang
|
1 |
|
[PATCH] Bluetooth: vhci: Serialize packet reception with device creation
Cen Zhang
|
2 |
|
[PATCH v4 0/2] Bluetooth: hci_qca: Reopen the UART after enabling QCA2066
Shuai Zhang
PENDING · 1 of 2 reviewed
|
6 |
|
[PATCH v3 0/2] Bluetooth: hci_qca: Reopen port after power on for QCA2066
Shuai Zhang
|
1 |
|
[PATCH] Bluetooth: hci_sync: Use the advertising set handle, not the instance
Weihong Guan
|
2 |
|
Re: [PATCH 5.15.y v2 0/3] Bluetooth: L2CAP: signalling response fixes
Siwei Zhang
|
none |
|
[PATCH v2 00/19] driver core: Authorize device trust before driver binding
Leon Romanovsky
|
6 |
|
[bluetooth-next:master] BUILD SUCCESS 983f3fcb1282824a945d5090210c4d19cbdcb53b
kernel test robot
|
none |
|
[PATCH] Bluetooth: btsdio: disable the TX work on removal
Myeonghun Pak
|
1 |
|
[PATCH v2 1/3] Bluetooth: btintel_pcie: Add yoyo support for config set TLV
Ajay KV
|
3 |
|
[BUG] Bluetooth: stack out-of-bounds write in eir_create_adv_data() and eir_create_scan_rsp() when a controller stops reporting LE Extended Advertising (seen on 7.3.1)
Piyus Kedia
|
1 |
|
[PATCH] Bluetooth: MGMT: Fix runtime config status opcode
raoxu
|
1 |
|
[PATCH v4 0/4] device_schedule_reprobe(): core helper and conversions
Daniel Golle
PENDING · 1 of 4 reviewed
|
1 |
|
[Bug 222250] New: v7.4-rc2: Bluetooth: hci0: Opcode 0x041a failed: -22
bugzilla-daemon@kernel.org
|
1 |
|
[PATCH 0/7] Bluetooth: make the Amlogic W1 (W155S2) usable
unknown sender
|
2 |
|
[syzbot] [bluetooth?] WARNING in disable_delayed_work_sync
syzbot
|
none |
|
[PATCH BlueZ v7 00/11] Add support for HDT and EKS
Luiz Augusto von Dentz
SUPERSEDED
|
1 |
|
[PATCH] Bluetooth: btusb: Use DECLARE_FLEX_ARRAY() for memdump segment data
Hex Lindqvist
|
1 |
|
[GIT PULL] bluetooth 2026-11-09
Luiz Augusto von Dentz
|
none |
|
[PATCH v1 00/18] obexd/pbap: Update PSE support from PBAP 1.1 to 1.2
Jinwang Li
|
1 |