Hi Masami,

On Fri, Jun 19, 2020 at 02:12:39PM +0900, Masami Hiramatsu wrote:

Hi Ming,

On Fri, 19 Jun 2020 07:19:01 +0800
Ming Lei [off-list ref] wrote:

quoted

quoted

I'm using 5.4 on ubuntu and can not reproduce it with kprobe_event.

root@devnote2:/sys/kernel/tracing# uname -a
Linux devnote2 5.4.0-37-generic #41-Ubuntu SMP Wed Jun 3 18:57:02 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
root@devnote2:/sys/kernel/tracing# echo p __blkdev_put > kprobe_events 
root@devnote2:/sys/kernel/tracing# echo 1 > events/kprobes/p___blkdev_put_0/enable 
root@devnote2:/sys/kernel/tracing# cat trace
# tracer: nop
#
# entries-in-buffer/entries-written: 0/0   #P:8
#
#                              _-----=> irqs-off
#                             / _----=> need-resched
#                            | / _---=> hardirq/softirq
#                            || / _--=> preempt-depth
#                            ||| /     delay
#           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
#              | |       |   ||||       |         |
root@devnote2:/sys/kernel/tracing# blockdev --getbsz /dev/nvme0n1
4096
root@devnote2:/sys/kernel/tracing# cat trace
# tracer: nop
#
# entries-in-buffer/entries-written: 1/1   #P:8
#
#                              _-----=> irqs-off
#                             / _----=> need-resched
#                            | / _---=> hardirq/softirq
#                            || / _--=> preempt-depth
#                            ||| /     delay
#           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
#              | |       |   ||||       |         |
           <...>-111740 [002] .... 301734.476991: p___blkdev_put_0: (__blkdev_put+0x0/0x1e0)

Hmm, maybe some issue in the latest kernel...?

Hello Masami,

I am testing the latest upstream kernel, your trace actually reproduces
this issue.

OK.

quoted

After 'blockdev --getbsz /dev/nvme0n1' returns, __blkdev_put() should
have been called two times(one for partition, and the other for disk),
however kprobe trace just shows one time of calling this function.

If trace_printk() is added at the entry of __blkdev_put() manually,
you will see that __blkdev_put() is called two times in 'blockdev
--getbsz /dev/nvme0n1'.

OK, let me check again on the latest kernel.
Here I tested with qemu.

root@devnote2:/sys/kernel/debug/tracing# uname -a
Linux devnote2 5.8.0-rc1+ #26 SMP PREEMPT Fri Jun 19 12:12:53 JST 2020 x86_64 x86_64 x86_64 GNU/Linux

And we have a (virtual) sda with 1 partition.

root@devnote2:/sys/kernel/debug/tracing# cat /proc/partitions 
major minor  #blocks  name

   8        0      10240 sda
   8        1       9216 sda1

OK, then let's make events (for sure)

root@devnote2:/sys/kernel/debug/tracing# echo p __blkdev_put >> kprobe_events 
root@devnote2:/sys/kernel/debug/tracing# echo r __blkdev_put >> kprobe_events 
root@devnote2:/sys/kernel/debug/tracing# echo p blkdev_put >> kprobe_events 

There are 3 events in the kernel, blkdev_put() and __blkdev_put() and
the return of __blkdev_put().
Then enable it and access to */dev/sda* (a disk)

root@devnote2:/sys/kernel/debug/tracing# echo 1 > events/kprobes/enable 
root@devnote2:/sys/kernel/debug/tracing# blockdev --getbsz /dev/sda
4096
root@devnote2:/sys/kernel/debug/tracing# echo 0 > events/kprobes/enable 
root@devnote2:/sys/kernel/debug/tracing# cat trace 
# tracer: nop
#
# entries-in-buffer/entries-written: 3/3   #P:8
#
#                              _-----=> irqs-off
#                             / _----=> need-resched
#                            | / _---=> hardirq/softirq
#                            || / _--=> preempt-depth
#                            ||| /     delay
#           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
#              | |       |   ||||       |         |
        blockdev-185   [002] ...1    72.604266: p_blkdev_put_0: (blkdev_put+0x0/0x130)
        blockdev-185   [002] ...1    72.604276: p___blkdev_put_0: (__blkdev_put+0x0/0x220)
        blockdev-185   [002] d..2    72.604288: r___blkdev_put_0: (blkdev_put+0x50/0x130 <- __blkdev_put)

So the __blkdev_put() is called once from blkdev_put().
Next, we do same trace with accessing */dev/sda1* (a partition).

root@devnote2:/sys/kernel/debug/tracing# echo > trace 
root@devnote2:/sys/kernel/debug/tracing# echo 1 > events/kprobes/enable 

I can't find 'events/kprobes' in my VM with upstream kernel, also not found
the dir under fedora31(5.5.15-200) & rhel8(v4.18 based).

Could you share me how to enable the kprobes event? I guess some kernel
config options are required.

root@devnote2:/sys/kernel/debug/tracing# blockdev --getbsz /dev/sda1 
4096
root@devnote2:/sys/kernel/debug/tracing# echo 0 > events/kprobes/enable 

I used samples/kprobes/kprobe_example.c by replacing __do_fork with
__blkdev_put for confirming this issue, and only one __blkdev_put trace is
observed in dmesg log when running 'blockdev --getbsz /dev/sda1'.


Thanks,
Ming