[PATCH v3 8/9] arm64: dts: st: Add USB nodes on stm32mp231
From: Marek Vasut <hidden>
Date: 2026-08-22 07:49:31
Also in:
linux-devicetree, linux-phy, linux-usb, lkml
Subsystem:
arm/stm32 architecture, the rest · Maintainers:
Maxime Coquelin, Alexandre Torgue, Linus Torvalds
Add USB controller and PHY nodes to stm32mp231 DT.
This includes two USB 2.0 FEMTO PHYs, USB 2.0 host
controller and DWC3 DRD controller nodes.
Co-developed-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Co-developed-by: Francois Choleau <redacted>
Signed-off-by: Francois Choleau <redacted>
Signed-off-by: Marek Vasut <redacted>
---
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Christian Bruel <christian.bruel@foss.st.com>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Pankaj Dev <redacted>
Cc: Rahul Kumar <redacted>
Cc: Rob Herring <robh@kernel.org>
Cc: Rosen Penev <redacted>
Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: kernel@dh-electronics.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-phy@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-usb@vger.kernel.org
---
V2: - Fix up Sob/Cdb lines
- Move PHY into syscfg subnode
- Turn st,stm32mp23-syscfg into simple-mfd
- Use clock-cells = <1> to discern OSC and future PLL clock from the PHY
V3: - Drop combophy which is not present on MP23
- Describe OHCI clock as the CMN clock
---
arch/arm64/boot/dts/st/stm32mp231.dtsi | 67 +++++++++++++++++++++++++-
1 file changed, 66 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/st/stm32mp231.dtsi b/arch/arm64/boot/dts/st/stm32mp231.dtsi
index 4505fc0e3b537..314a514f31024 100644
--- a/arch/arm64/boot/dts/st/stm32mp231.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp231.dtsi@@ -7,6 +7,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/regulator/st,stm32mp25-regulator.h> #include <dt-bindings/reset/st,stm32mp25-rcc.h> +#include <dt-bindings/phy/phy.h> / { #address-cells = <2>;
@@ -862,6 +863,48 @@ stmmac_axi_config_1: stmmac-axi-config { snps,wr_osr_lmt = <0x7>; }; }; + + usbh_ohci: usb@482e0000 { + compatible = "generic-ohci"; + reg = <0x482e0000 0x1000>; + access-controllers = <&rifsc 63>; + clocks = <&usb2_phy1 1>, <&rcc CK_BUS_USB2OHCI>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_phy1>; + phy-names = "usb"; + resets = <&rcc USBH_R>; + status = "disabled"; + }; + + usbh_ehci: usb@482f0000 { + compatible = "generic-ehci"; + reg = <0x482f0000 0x1000>; + access-controllers = <&rifsc 63>; + clocks = <&usb2_phy1 0>, <&rcc CK_BUS_USB2EHCI>; + companion = <&usbh_ohci>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_phy1>; + phy-names = "usb"; + resets = <&rcc USBH_R>; + status = "disabled"; + }; + + usb3dr: usb@48300000 { + compatible = "st,stm32mp25-dwc3"; + reg = <0x48300000 0x100000>; + access-controllers = <&rifsc 66>; + clocks = <&rcc CK_KER_USB2PHY2>, + <&rcc CK_BUS_USB3DR>, + <&rcc CK_KER_USB2PHY2>; + clock-names = "ref", "bus_early", "suspend"; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; + maximum-speed = "high-speed"; + phys = <&usb2_phy2>; + phy-names = "usb2-phy"; + resets = <&rcc USB3DR_R>; + st,syscfg = <&syscfg 0x4800>; + status = "disabled"; + }; }; bsec: efuse@44000000 {
@@ -1062,9 +1105,31 @@ exti1: interrupt-controller@44220000 { }; syscfg: syscon@44230000 { - compatible = "st,stm32mp23-syscfg", "syscon"; + compatible = "st,stm32mp23-syscfg", "syscon", "simple-mfd"; reg = <0x44230000 0x10000>; #clock-cells = <0>; + #address-cells = <1>; + #size-cells = <1>; + + usb2_phy1: phy@2400 { + compatible = "st,stm32mp25-usb2phy1"; + reg = <0x2400 0x24>; + #phy-cells = <0>; + #clock-cells = <1>; + clocks = <&rcc CK_KER_USB2PHY1>; + resets = <&rcc USB2PHY1_R>; + status = "disabled"; + }; + + usb2_phy2: phy@2800 { + compatible = "st,stm32mp25-usb2phy2"; + reg = <0x2800 0xc>; + #phy-cells = <0>; + #clock-cells = <1>; + clocks = <&rcc CK_KER_USB2PHY2EN>; + resets = <&rcc USB2PHY2_R>; + status = "disabled"; + }; }; pinctrl: pinctrl@44240000 {
--
2.53.0