Re: [PATCH] arm64: dts: mediatek: mt8188-geralt: Add MT6319 PMIC

On 7/7/26 13:08, Chen-Yu Tsai wrote:

On Tue, Jul 7, 2026 at 7:05 PM AngeloGioacchino Del Regno
[off-list ref] wrote:

quoted

On 7/7/26 12:44, Chen-Yu Tsai wrote:

quoted

The Geralt design uses a MT6319 PMIC to power the big cores and LPDDR4X
DRAM.

Add a device node for it and hook up all the supplies.

This change requires a firmware fix for the SPMI bus to read back
correctly. The required firmware version is 15842.175.0. This is
included in ChromeOS releases R150-16700.22.0 (available in Beta
channel as of writing or stable channel in mid-July) or
R151-16721.0.0 and later.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>

This is a big problem then.

I take it as if the firmware fix is not in place, probing the CPU power supplies
will fail, with all the consequences.

That's right.

quoted

This means that with this, we're breaking all Geralt machines with older firmware,
which is not acceptable...

...so this needs a different solution, or strong reasons to make me understand that
I'm wrong, if I'm wrong.

We can drop the CPU supplies (they don't matter since cpufreq is hardware
driven) and just add the regulators. How does that sound? If the firmware
isn't updated, the PMIC will fail to probe, but since nothing is using it,
the system will continue to work (with some annoying error messages).

That'd be wrong, but less wrong than not having anything described...

...I wonder if, at this point, you could set the SPMI node to status = "fail" and
have the *new* firmware override that to "ok".

That's the only reasonable way to go forward, IMO.

Of course, avoid having the firmware adding the CPU supplies, because that would
be rather sketchy then. Just "if spmi status fail found, change to ok".

Cheers,
Angelo

ChenYu

quoted

Cheers,
Angelo

quoted

---
   .../boot/dts/mediatek/mt8188-geralt.dtsi      | 66 +++++++++++++++++++
   1 file changed, 66 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi b/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
index f382f90c48f5..fea52c377d88 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi

@@ -4,6 +4,8 @@
    */
   /dts-v1/;
   #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/spmi/spmi.h>
+
   #include "mt8188.dtsi"
   #include "mt6359.dtsi"

@@ -241,6 +243,14 @@ &cpu5 {
       cpu-supply = <&mt6359_vcore_buck_reg>;
   };

+&cpu6 {
+     cpu-supply = <&mt6319_buck1>;
+};
+
+&cpu7 {
+     cpu-supply = <&mt6319_buck1>;
+};
+
   /*
    * Geralt is the reference design and doesn't have target TDP.
    * Ciri is (currently) the only device following Geralt, and its

@@ -1156,6 +1166,14 @@ pins-bus {
               };
       };

+     spmi_pins: spmi-pins {
+             pins-bus {
+                     pinmux = <PINMUX_GPIO175__FUNC_B0_SPMI_M_SCL>,
+                              <PINMUX_GPIO176__FUNC_B0_SPMI_M_SDA>;
+                     bias-disable;
+             };
+     };
+
       uart0_pins: uart0-pins {
               pins-bus {
                       pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,

@@ -1267,6 +1285,54 @@ &spi2 {
       status = "okay";
   };

+&spmi {
+     pinctrl-names = "default";
+     pinctrl-0 = <&spmi_pins>;
+     #address-cells = <2>;
+     #size-cells = <0>;
+     status = "okay";
+
+     pmic@6 {
+             compatible = "mediatek,mt6319-regulator", "mediatek,mt6315-regulator";
+             reg = <0x6 SPMI_USID>;
+             pvdd1-supply = <&pp4200_s5>;
+             pvdd2-supply = <&pp4200_s5>;
+             pvdd3-supply = <&pp4200_s5>;
+             pvdd4-supply = <&pp4200_s5>;
+
+             regulators {
+                     mt6319_buck1: vbuck1 {
+                                     regulator-name = "ppvar_dvdd_proc_bc";
+                                     regulator-min-microvolt = <520000>;
+                                     regulator-max-microvolt = <1155000>;
+                                     regulator-enable-ramp-delay = <256>;
+                                     regulator-allowed-modes = <0 1 2>;
+                                     regulator-always-on;
+                     };
+
+                     /* vbuck2 is ganged with vbuck1 */
+
+                     mt6319_buck3: vbuck3 {
+                                     regulator-name = "pp1125_emi_vdd2";
+                                     regulator-min-microvolt = <1060000>;
+                                     regulator-max-microvolt = <1170000>;
+                                     regulator-enable-ramp-delay = <256>;
+                                     regulator-allowed-modes = <0 1 2>;
+                                     regulator-always-on;
+                     };
+
+                     mt6319_buck4: vbuck4 {
+                                     regulator-name = "pp0600_emi_vddq";
+                                     regulator-min-microvolt = <570000>;
+                                     regulator-max-microvolt = <650000>;
+                                     regulator-enable-ramp-delay = <256>;
+                                     regulator-allowed-modes = <0 1 2>;
+                                     regulator-always-on;
+                     };
+             };
+     };
+};
+
   &uart0 {
       pinctrl-names = "default";
       pinctrl-0 = <&uart0_pins>;