From: Hakyeong Kim <redacted>

Add initial clock support for ARTPEC-8 SoC which is required
for enabling basic clock management.

Add clock support for below CMU block in ARTPEC-8 SoC:
 - CMU_IMEM

Signed-off-by: Ravi Patel <redacted>
Signed-off-by: Hakyeong Kim <redacted>
---
 drivers/clk/samsung/Kconfig       |  8 ++++
 drivers/clk/samsung/Makefile      |  1 +
 drivers/clk/samsung/clk-artpec8.c | 62 +++++++++++++++++++++++++++++++
 3 files changed, 71 insertions(+)
 create mode 100644 drivers/clk/samsung/clk-artpec8.c

diff --git a/drivers/clk/samsung/Kconfig b/drivers/clk/samsung/Kconfig
index 76a494e95027..289591b403ad 100644
--- a/drivers/clk/samsung/Kconfig
+++ b/drivers/clk/samsung/Kconfig

@@ -13,6 +13,7 @@ config COMMON_CLK_SAMSUNG
 	select EXYNOS_5420_COMMON_CLK if ARM && SOC_EXYNOS5420
 	select EXYNOS_ARM64_COMMON_CLK if ARM64 && ARCH_EXYNOS
 	select TESLA_FSD_COMMON_CLK if ARM64 && ARCH_TESLA_FSD
+	select ARTPEC8_COMMON_CLK if ARM64 && ARCH_ARTPEC8

 
 config S3C64XX_COMMON_CLK
 	bool "Samsung S3C64xx clock controller support" if COMPILE_TEST

@@ -102,3 +103,10 @@ config TESLA_FSD_COMMON_CLK
 	help
 	  Support for the clock controller present on the Tesla FSD SoC.
 	  Choose Y here only if you build for this SoC.
+
+config ARTPEC8_COMMON_CLK