[PATCH v2 1/8] PCI: brcmstb: Set gen limitation before link, not after
From: Jim Quinlan <hidden>
Date: 2025-02-14 17:39:56
Also in:
linux-pci, lkml
Subsystem:
broadcom bcm2711/bcm2835 arm architecture, broadcom bcm7xxx arm architecture, broadcom stb pcie driver, pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers:
Florian Fainelli, Jim Quinlan, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds
When the user elects to limit the PCIe generation via the appropriate DT
property, apply the settings before the PCIe link-up, not after.
Fixes: c0452137034bda8f686dd9a2e167949bfffd6776 ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver")
Signed-off-by: Jim Quinlan <redacted>
---
drivers/pci/controller/pcie-brcmstb.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 546056f7f0d3..64a7511e66a8 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c@@ -1324,6 +1324,10 @@ static int brcm_pcie_start_link(struct brcm_pcie *pcie) bool ssc_good = false; int ret, i; + /* Limit the generation if specified */ + if (pcie->gen) + brcm_pcie_set_gen(pcie, pcie->gen); + /* Unassert the fundamental reset */ ret = pcie->cfg->perst_set(pcie, 0); if (ret)
@@ -1350,9 +1354,6 @@ static int brcm_pcie_start_link(struct brcm_pcie *pcie) brcm_config_clkreq(pcie); - if (pcie->gen) - brcm_pcie_set_gen(pcie, pcie->gen); - if (pcie->ssc) { ret = brcm_pcie_set_ssc(pcie); if (ret == 0)
--
2.43.0