Re: [PATCH v4 1/4] dt-bindings: clock: add ExynosAuto v920 SoC CMU bindings

Add dt-schema for ExynosAuto v920 SoC clock controller.
Add device tree clock binding definitions for below CMU blocks.

- CMU_TOP
- CMU_PERIC0

Signed-off-by: Sunyeal Hong <redacted>
---
 .../clock/samsung,exynosautov920-clock.yaml   | 115 +++++++++++
 .../clock/samsung,exynosautov920.h            | 191 ++++++++++++++++++
 2 files changed, 306 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml
 create mode 100644 include/dt-bindings/clock/samsung,exynosautov920.h

diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml
new file mode 100644
index 000000000000..90f9f17da959
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml

@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynosautov920-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung ExynosAuto v920 SoC clock controller
+
+maintainers:
+  - Sunyeal Hong <sunyeal.hong@samsung.com>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description: |
+  ExynosAuto v920 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. Root clocks in that clock tree are
+  two external clocks:: OSCCLK/XTCXO (38.4 MHz) and RTCCLK/XrtcXTI (32768 Hz).
+  The external OSCCLK must be defined as fixed-rate clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other clocks of function blocks (other CMUs) are usually
+  derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'include/dt-bindings/clock/samsung,exynosautov920.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynosautov920-cmu-top
+      - samsung,exynosautov920-cmu-peric0
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3