Re: [PATCH v4 1/5] dt-bindings: media: add mediatek ISP3.0 sensor interface
From: Krzysztof Kozlowski <hidden>
Date: 2024-01-12 07:32:31
Also in:
linux-devicetree, linux-media, linux-mediatek, lkml
On 10/01/2024 15:14, Julien Stephan wrote:
From: Louis Kuo <redacted> This adds the bindings, for the mediatek ISP3.0 SENINF module embedded in some Mediatek SoC, such as the mt8365
...
+ clock-names: + items: + - const: camsys + - const: top_mux + + phys: + minItems: 1 + maxItems: 4 + description: + phandle to the PHYs connected to CSI0/A, CSI1, CSI2 and CSI0B + + phy-names: + minItems: 1 + items: + - const: csi0 + - const: csi1 + - const: csi2 + - const: csi0b
Why one hardware has flexible number of phys?
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI0 or CSI0A port
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI1 port
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ port@2:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI2 port
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ port@3:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI0B port
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+ data-lanes:
+ minItems: 1
+ maxItems: 2
+
+ port@4:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for cam0
+
+ port@5:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for cam1
+
+ port@6:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for camsv0
+
+ port@7:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for camsv1
+
+ port@8:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for camsv2
+
+ port@9:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for camsv3
+
+ required:
+ - port@0
+ - port@1
+ - port@2
+ - port@3
+ - port@4
+ - port@5
+ - port@6
+ - port@7
+ - port@8
+ - port@9
+
+required:
+ - compatible
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mediatek,mt8365-clk.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/phy/phy.h>
+ #include <dt-bindings/power/mediatek,mt8365-power.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;Use 4 spaces for example indentation.
+
+ seninf: seninf@15040000 {Node names should be generic. See also an explanation and list of examples (not exhaustive) in DT specification: https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
+ compatible = "mediatek,mt8365-seninf";
+ reg = <0 0x15040000 0 0x6000>;
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&camsys CLK_CAM_SENIF>,
+ <&topckgen CLK_TOP_SENIF_SEL>;
+ clock-names = "camsys", "top_mux";
+
+ power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
+
+ phys = <&mipi_csi0 PHY_TYPE_DPHY>;
+ phy-names = "csi0";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ seninf_in1: endpoint {
+ clock-lanes = <2>;
+ data-lanes = <1 3 0 4>;
+ remote-endpoint = <&isp1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ seninf_camsv1_endpoint: endpoint {
+ remote-endpoint = <&camsv1_endpoint>;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+ };
+
+ port@6 {
+ reg = <6>;
+ };
+
+ port@7 {
+ reg = <7>;
+ };
+
+ port@8 {
+ reg = <8>;
+ };
+
+ port@9 {
+ reg = <9>;
+ };
+Stray blank line
+ };
Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel