Re: [PATCH v4 1/5] dt-bindings: media: add mediatek ISP3.0 sensor interface
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: 2024-01-11 08:15:24
Also in:
linux-devicetree, linux-media, linux-mediatek, lkml
Hi Julien, Thank you for the patch. On Wed, Jan 10, 2024 at 03:14:38PM +0100, Julien Stephan wrote:
quoted hunk ↗ jump to hunk
From: Louis Kuo <redacted> This adds the bindings, for the mediatek ISP3.0 SENINF module embedded in some Mediatek SoC, such as the mt8365 Signed-off-by: Louis Kuo <redacted> Signed-off-by: Phi-Bang Nguyen <redacted> Signed-off-by: Julien Stephan <jstephan@baylibre.com> Link: https://lore.kernel.org/r/20230807094940.329165-2-jstephan@baylibre.com (local) Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- .../media/mediatek,mt8365-seninf.yaml | 259 ++++++++++++++++++ MAINTAINERS | 7 + 2 files changed, 266 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yamldiff --git a/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml new file mode 100644 index 000000000000..0a7b7d949df7 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml@@ -0,0 +1,259 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2023 MediaTek, BayLibre +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mt8365-seninf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Sensor Interface 3.0 + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + - Julien Stephan <jstephan@baylibre.com> + - Andy Hsieh <andy.hsieh@mediatek.com> + +description: + The ISP3.0 SENINF is the CSI-2 and parallel camera sensor interface found in + multiple MediaTek SoCs. It can support up to three physical CSI-2 + input ports, configured in DPHY (2 or 4 data lanes) or CPHY depending on the soc.
s/soc/SoC/ And while at it, you can reflow the text to 80 columns.
+ On the output side, SENINF can be connected either to CAMSV instance or
+ to the internal ISP. CAMSV is used to bypass the internal ISP processing
+ in order to connect either an external ISP, or a sensor (RAW, YUV).
+
+properties:
+ compatible:
+ const: mediatek,mt8365-seninf
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Seninf camsys clock
+ - description: Seninf top mux clock
+
+ clock-names:
+ items:
+ - const: camsys
+ - const: top_mux
+
+ phys:
+ minItems: 1
+ maxItems: 4
+ description:
+ phandle to the PHYs connected to CSI0/A, CSI1, CSI2 and CSI0B
+
+ phy-names:
+ minItems: 1
+ items:
+ - const: csi0
+ - const: csi1
+ - const: csi2
+ - const: csi0b
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI0 or CSI0A port
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI1 port
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ port@2:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI2 port
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ port@3:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI0B port
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+ data-lanes:
+ minItems: 1
+ maxItems: 2
+
+ port@4:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for cam0
+
+ port@5:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for cam1
+
+ port@6:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for camsv0
+
+ port@7:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for camsv1
+
+ port@8:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for camsv2
+
+ port@9:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for camsv3
+
+ required:
+ - port@0
+ - port@1
+ - port@2
+ - port@3
+ - port@4
+ - port@5
+ - port@6
+ - port@7
+ - port@8
+ - port@9
+
+required:
+ - compatible
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mediatek,mt8365-clk.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/phy/phy.h>
+ #include <dt-bindings/power/mediatek,mt8365-power.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ seninf: seninf@15040000 {
+ compatible = "mediatek,mt8365-seninf";
+ reg = <0 0x15040000 0 0x6000>;
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&camsys CLK_CAM_SENIF>,
+ <&topckgen CLK_TOP_SENIF_SEL>;
+ clock-names = "camsys", "top_mux";
+
+ power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
+
+ phys = <&mipi_csi0 PHY_TYPE_DPHY>;
+ phy-names = "csi0";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ seninf_in1: endpoint {
+ clock-lanes = <2>;
+ data-lanes = <1 3 0 4>;
+ remote-endpoint = <&isp1_out>;Indentation issue, you need two more spaces here. With these small issues fixed, Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
quoted hunk ↗ jump to hunk
+ }; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; + + port@4 { + reg = <4>; + seninf_camsv1_endpoint: endpoint { + remote-endpoint = <&camsv1_endpoint>; + }; + }; + + port@5 { + reg = <5>; + }; + + port@6 { + reg = <6>; + }; + + port@7 { + reg = <7>; + }; + + port@8 { + reg = <8>; + }; + + port@9 { + reg = <9>; + }; + + }; + }; + }; + +...diff --git a/MAINTAINERS b/MAINTAINERS index 41e0862cfa7d..4444e719cf8e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS@@ -13611,6 +13611,13 @@ M: Sean Wang <sean.wang@mediatek.com> S: Maintained F: drivers/char/hw_random/mtk-rng.c +MEDIATEK ISP3.0 DRIVER +M: Laurent Pinchart <laurent.pinchart@ideasonboard.com> +M: Julien Stephan <jstephan@baylibre.com> +M: Andy Hsieh <andy.hsieh@mediatek.com> +S: Supported +F: Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml + MEDIATEK SMI DRIVER M: Yong Wu <yong.wu@mediatek.com> L: linux-mediatek@lists.infradead.org (moderated for non-subscribers)
-- Regards, Laurent Pinchart _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel