Re: [PATCH 8/9] ARM: multi_v7_defconfig: Add options to support TQMLS102xA series

On 20/01/2023 12:12, Alexander Stein wrote:

quoted

quoted

 CONFIG_GPIO_MXC=y
 CONFIG_GPIO_RCAR=y
 CONFIG_GPIO_SYSCON=y

@@ -493,6 +497,7 @@ CONFIG_GPIO_PCA953X=y

 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_PCF857X=y
 CONFIG_GPIO_PALMAS=y

+CONFIG_GPIO_STMPE=y

module

That one as well, it's just a bool.

OK

quoted

quoted

 CONFIG_GPIO_TPS6586X=y
 CONFIG_GPIO_TPS65910=y
 CONFIG_GPIO_TWL4030=y

@@ -533,6 +538,7 @@ CONFIG_SENSORS_INA2XX=m

 CONFIG_CPU_THERMAL=y
 CONFIG_DEVFREQ_THERMAL=y
 CONFIG_IMX_THERMAL=y

+CONFIG_QORIQ_THERMAL=m

 CONFIG_ROCKCHIP_THERMAL=y
 CONFIG_RCAR_THERMAL=y
 CONFIG_ARMADA_THERMAL=y

@@ -821,6 +827,8 @@ CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m

 CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
 CONFIG_SND_SOC_SGTL5000=m
 CONFIG_SND_SOC_STI_SAS=m

+CONFIG_SND_SOC_TLV320AIC32X4=m
+CONFIG_SND_SOC_TLV320AIC32X4_I2C=m

 CONFIG_SND_SOC_WM8978=m
 CONFIG_SND_AUDIO_GRAPH_CARD=m
 CONFIG_USB=y

@@ -830,6 +838,7 @@ CONFIG_USB_XHCI_MVEBU=y

 CONFIG_USB_XHCI_TEGRA=m
 CONFIG_USB_BRCMSTB=m
 CONFIG_USB_EHCI_HCD=y

+CONFIG_USB_EHCI_FSL=y

module

Well, apparently module autoload is broken due to wrong modalias value of ehci 
node created by fsl-mph-dr-of. This setting this as a module is currently not 
working.

But this is not valid argument for defconfig change. This must be
module. If autoloading does not work, fix that one.

quoted

quoted

 CONFIG_USB_EHCI_HCD_STI=y
 CONFIG_USB_EHCI_EXYNOS=m
 CONFIG_USB_EHCI_MV=m

@@ -933,6 +942,8 @@ CONFIG_NEW_LEDS=y

 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_CLASS_FLASH=m
 CONFIG_LEDS_CPCAP=m

+CONFIG_LEDS_PCA9532=m
+CONFIG_LEDS_PCA9532_GPIO=y

 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
 CONFIG_LEDS_MAX8997=m

@@ -949,6 +960,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

 CONFIG_LEDS_TRIGGER_TRANSIENT=y
 CONFIG_LEDS_TRIGGER_CAMERA=y
 CONFIG_EDAC=y

+CONFIG_EDAC_LAYERSCAPE=y

 CONFIG_EDAC_HIGHBANK_MC=y
 CONFIG_EDAC_HIGHBANK_L2=y
 CONFIG_RTC_CLASS=y

@@ -962,6 +974,7 @@ CONFIG_RTC_DRV_MAX8997=m

 CONFIG_RTC_DRV_MAX77686=y
 CONFIG_RTC_DRV_RK808=m
 CONFIG_RTC_DRV_RS5C372=m

+CONFIG_RTC_DRV_PCF85063=y

module

Okay, module it is. So I assume it is acceptable the system time is set much 
later after mounting rootfs then?

Modules can be loaded from initramfs, not rootfs.

Defconfig=y is only for critical stuff needed to bring initramfs. Time
is not needed for initramfs.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel