Re: [PATCH 2/9] ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree
From: Krzysztof Kozlowski <hidden>
Date: 2023-01-19 17:03:22
Also in:
linux-devicetree
On 19/01/2023 15:42, Alexander Stein wrote:
quoted hunk ↗ jump to hunk
Add device tree for the MBLS102xA mainboard with TQMLS1021A SoM. Signed-off-by: Alexander Stein <redacted> --- arch/arm/boot/dts/Makefile | 1 + .../boot/dts/ls1021a-tqmls1021a-mbls1021a.dts | 409 ++++++++++++++++++ arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi | 93 ++++ 3 files changed, 503 insertions(+) create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a.dtsidiff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d0c07867aeabe..44b5ed44b13d6 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile@@ -802,6 +802,7 @@ dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-iot.dtb \ ls1021a-moxa-uc-8410a.dtb \ ls1021a-qds.dtb \ + ls1021a-tqmls1021a-mbls1021a.dtb \ ls1021a-tsn.dtb \ ls1021a-twr.dtb dtb-$(CONFIG_SOC_VF610) += \diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts new file mode 100644 index 0000000000000..21da171b9f38e --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts@@ -0,0 +1,409 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/leds/leds-pca9532.h> +#include <dt-bindings/net/ti-dp83867.h> +#include "ls1021a-tqmls1021a.dtsi" + +/ { + model = "TQMLS102xA SOM on MBLS102xA"; + compatible = "tq,ls1021a-tqmls1021a-mbls102xa", "tq,ls1021a-tqmls1021a", "fsl,ls1021a"; + + audio_mclk: audio-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + backlight_dcu: backlight { + compatible = "gpio-backlight"; + gpios = <&pca9530 0 GPIO_ACTIVE_LOW>; + status = "disabled"; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + switch-1 { + label = "S6"; + linux,code = <BTN_0>; + gpios = <&pca9554_0 0 GPIO_ACTIVE_LOW>; + }; + + btn2: switch-2 { + label = "S7"; + linux,code = <BTN_1>; + gpios = <&pca9554_0 1 GPIO_ACTIVE_LOW>; + }; + + switch-3 { + label = "S8"; + linux,code = <BTN_2>; + gpios = <&pca9554_0 2 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds: gpio-leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + function-enumerator = <0>; + gpios = <&pca9554_2 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + function-enumerator = <1>; + gpios = <&pca9554_2 5 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + function-enumerator = <2>; + gpios = <&pca9554_2 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-3 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <0>; + gpios = <&pca9554_2 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + lvds_encoder: lvds-encoder { + compatible = "ti,sn75lvds83", "lvds-encoder"; + power-supply = <®_3p3v>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_encoder_in: endpoint {}; + }; + + port@1 { + reg = <1>; + + lvds_encoder_out: endpoint {}; + }; + }; + }; + + reg_1p2v: regulator-1p2v { + compatible = "regulator-fixed"; + regulator-name = "1P2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + vin-supply = <®_3p3v>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + hdmi_out: hdmi { + compatible = "hdmi-connector"; + type = "a"; + ddc-i2c-bus = <&i2c0>; + status = "disabled"; + + port { + hdmi_in: endpoint { + remote-endpoint = <&sii9022a_out>; + }; + }; + }; + + display: panel { + backlight = <&backlight_dcu>; + enable-gpios = <&pca9554_1 3 GPIO_ACTIVE_HIGH>; + status = "disabled"; + + port { + panel_in: endpoint {}; + }; + }; + + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + model = "ls1021a-mbls1021a-tlv320aic32"; + ssi-controller = <&sai1>; + audio-codec = <&tlv320aic32x4>; + }; + +}; + +&can0 { + status = "okay"; + xceiver-supply = <®_3p3v>; +}; + +&can1 { + status = "okay"; + xceiver-supply = <®_3p3v>; +}; + +&dspi0 { + bus-num = <0>; + status = "okay"; +}; + +&enet0 { + phy-handle = <&rgmii_phy0c>; + phy-mode = "rgmii-id"; + mac-address = [ 00 00 00 00 00 00 ]; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&sgmii_phy03>; + phy-mode = "sgmii"; + mac-address = [ 00 00 00 00 00 00 ]; + status = "okay"; +}; + +&enet2 { + phy-handle = <&rgmii_phy04>; + phy-mode = "rgmii-id"; + mac-address = [ 00 00 00 00 00 00 ]; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + tlv320aic32x4: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + clocks = <&audio_mclk>; + clock-names = "mclk"; + ldoin-supply = <®_3p3v>; + iov-supply = <®_3p3v>; + }; + + pca9554_0: gpio-expander@20 { + compatible = "nxp,pca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + vcc-supply = <®_3p3v>; + gpio-line-names = "BUTTON0", "BUTTON1", + "BUTTON2", "EMMC_SEL", + "DIP2", "DIP3", + "EXT_TOUCH_INT", "GPIO_1"; + }; + + pca9554_1: gpio-expander@21 { + compatible = "nxp,pca9554"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + vcc-supply = <®_3p3v>; + gpio-line-names = "PCIE_PWR_EN", "MPCIE_DISABLE#", + "MPCIE_WAKE#", "LCD_BLT_EN", + "LCD_PWR_EN", "EC1_PHY_PWDN", + "EC3_PHY_PWDN", "SGMII_PHY_PWDN"; + }; + + pca9554_2: gpio-expander@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&extirq>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + vcc-supply = <®_3p3v>; + gpio-line-names = "MUX_SEL0", "MUX_SEL1", + "MUX_SEL2", "MUX_SEL3", + "V95", "V96", "V97", "V98"; + }; + + sii9022a: hdmi-transmitter@3b { + compatible = "sil,sii9022"; + reg = <0x3b>; + iovcc-supply = <®_3p3v>; + cvcc12-supply = <®_1p2v>; + interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>; + #sound-dai-cells = <0>; + sil,i2s-data-lanes = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sii9022a_in: endpoint {}; + }; + + port@1 { + reg = <1>; + + sii9022a_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; + + stmpe811: touchscreen@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&gpio0>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + vcc-supply = <®_3p3v>; + vio-supply = <®_3p3v>; + status = "okay";
Drop, why do you need it?
+
+ stmpe_gpio {No underscores in node names, generic node names, so "gpio". Does anything depend on odd naming?
+ compatible = "st,stmpe-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO 5-7 used for touch */
+ st,norequest-mask = <0xf0>;
+ gpio-line-names = "GPIO_ADC_I2C1_1",
+ "GPIO_ADC_I2C1_2",
+ "GPIO_ADC_I2C1_3",
+ "GPIO_ADC_I2C1_4";
+ };
+
+ stmpe_touchscreen {Same problems.
+ compatible = "st,stmpe-ts";
+ status = "disabled";
+ };
+ };
+
+ pca9530: leds@60 {
+ compatible = "nxp,pca9530";
+ reg = <0x60>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "PWM_0", "PWM_1";
+
+ gpio_pwm_0 {No underscores in node names, generic node names. This is neither GPIO nor PWM.
quoted hunk ↗ jump to hunk
+ label = "pca9530:pwm0"; + type = <PCA9532_TYPE_GPIO>; + }; + + gpio_pwm_1 { + label = "pca9530:pwm1"; + type = <PCA9532_TYPE_GPIO>; + }; + }; + +}; + +&i2c1 { + status = "okay"; +}; + +&lpuart0 { + status = "okay"; + linux,rs485-enabled-at-boot-time; +}; + +&mdio0 { + sgmii_phy03: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x03>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + ti,dp83867-rxctrl-strap-quirk; + }; + + rgmii_phy04: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x04>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + + rgmii_phy0c: ethernet-phy@c { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0c>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; +}; + +&pwm6 { + status = "okay"; +}; + +&pwm7 { + status = "okay"; +}; + +&sai1 { + status = "okay"; +}; + +&sata { + /delete-property/ dma-coherent; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb3 { + /* + * Although DR connector, VBUS is always driven, so + * restrict to host mode. + */ + dr_mode = "host"; + status = "okay"; +};diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi b/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi new file mode 100644 index 0000000000000..1ab518c489252 --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi@@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +#include "ls1021a.dtsi" + +/ { + model = "TQMLS102xA SOM"; + compatible = "tq,ls1021a-tqmls1021a", "fsl,ls1021a"; + + reg_3p3v_som: regulator-3p3v-som { + compatible = "regulator-fixed"; + regulator-name = "3P3V_SOM"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&esdhc { + compatible = "fsl,esdhc", "fsl,ls1021a-esdhc"; + /* e-MMC over 8 data lines */ + bus-width = <8>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + mc34vr500: pmic@8 { + reg = <0x08>;
No compatible? What's this?
+ status = "disabled";
+ };
+
+ pmc0: pmc@11 {No compatible? What's this?
+ reg = <0x11>;
+ status = "disabled";
+ };
+
+ sa56004: temperature-sensor@4c {
+ compatible = "nxp,sa56004";
+ reg = <0x4c>;
+ vcc-supply = <®_3p3v_som>;
+ };
+
+ adm1069: supervisor@4f {No compatible? What's this?
+ reg = <0x4f>;
+ status = "disabled";
+ };
+
+ rtc0: rtc@51 {
+ compatible = "nxp,pcf85063a";
+ quartz-load-femtofarads = <12500>;
+ reg = <0x51>;Reg is second property
+ };
+
+ m24c64_54: eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ pagesize = <32>;
+ read-only;
+ vcc-supply = <®_3p3v_som>;
+ };
+};Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel