On 05/12/2022 07:57, Xiangsheng Hou wrote:

1. Split MediaTek ECC engine with rawnand controller and convert to
YAML schema.
2. Change the existing node name in order to match NAND controller DT
bindings.

One patch - one logical change. Not two. This applies to all your
patches, so whenever you want to enumerate, please think twice.

Signed-off-by: Xiangsheng Hou <redacted>
---
 .../bindings/mtd/mediatek,mtk-nfc.yaml        | 171 +++++++++++++++++
 .../mtd/mediatek,nand-ecc-engine.yaml         |  62 ++++++
 .../devicetree/bindings/mtd/mtk-nand.txt      | 176 ------------------
 arch/arm/boot/dts/mt2701.dtsi                 |   2 +-
 arch/arm64/boot/dts/mediatek/mt2712e.dtsi     |   2 +-
 arch/arm64/boot/dts/mediatek/mt7622.dtsi      |   2 +-

Do not combine bindings and DTS.

I don't think this could be anything. You need to describe it, so $ref
and description.

+
+  partitions:
+    $ref: mtd.yaml#

How the partitions are MTD device? Open that file and see how it should
be defined... Anyway mtd.yaml is part of nand-chip, not nand-controller.

+
+allOf:
+  - $ref: nand-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt2701-nfc
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          type: object

No need for type, the definition is already there through
nand-controller.yaml.

+          properties:
+            reg:
+              minimum: 0
+              maximum: 1

This is the same as other variant, so should be defined in top-level
pattern properties.

+            nand-ecc-mode:
+              const: hw

Ditto

+            nand-ecc-step-size:
+              enum: [ 512, 1024 ]> +            nand-ecc-strength:
+              enum: [4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,
+                     40, 44, 48, 52, 56, 60]
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt2712-nfc
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          type: object
+          properties:
+            reg:
+              minimum: 0
+              maximum: 1
+            nand-ecc-mode:
+              const: hw
+            nand-ecc-step-size:
+              enum: [ 512, 1024 ]
+            nand-ecc-strength:
+              enum: [4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,
+                     40, 44, 48, 52, 56, 60, 68, 72, 80]
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7622-nfc
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          type: object
+          properties:
+            reg:
+              minimum: 0
+              maximum: 1
+            nand-ecc-mode:
+              const: hw
+            nand-ecc-step-size:
+              const: 512
+            nand-ecc-strength:
+              enum: [4, 6, 8, 10, 12]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ecc-engine
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        nand-controller@1100d000 {
+            compatible = "mediatek,mt2701-nfc";
+            reg = <0 0x1100d000 0 0x1000>;
+            interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&pericfg CLK_PERI_NFI>,
+                     <&pericfg CLK_PERI_NFI_PAD>;
+            clock-names = "nfi_clk", "pad_clk";
+            ecc-engine = <&bch>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            nand@0 {
+                reg = <0>;
+
+                nand-on-flash-bbt;
+                nand-ecc-mode = "hw";
+                nand-ecc-step-size = <1024>;
+                nand-ecc-strength = <24>;
+
+                partitions {
+                    compatible = "fixed-partitions";
+                    #address-cells = <1>;
+                    #size-cells = <1>;
+
+                    preloader@0 {
+                        label = "pl";
+                        read-only;
+                        reg = <0x0 0x400000>;
+                    };
+                    android@400000 {
+                        label = "android";
+                        reg = <0x400000 0x12c00000>;
+                    };
+                };
+            };
+        };
+
+        bch: ecc@1100e000 {
+            compatible = "mediatek,mt2701-ecc";
+            reg = <0 0x1100e000 0 0x1000>;
+            interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&pericfg CLK_PERI_NFI_ECC>;
+            clock-names = "nfiecc_clk";

You already have example of ecc in other binding, so drop from this one.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel