Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT
From: Krzysztof Kozlowski <hidden>
Date: 2022-11-23 14:13:36
Also in:
linux-amlogic, linux-clk, linux-devicetree, lkml
On 23/11/2022 14:27, Neil Armstrong wrote:
On 23/11/2022 11:10, Krzysztof Kozlowski wrote:quoted
On 23/11/2022 03:13, Yu Tu wrote:quoted
Added information about the S4 SOC Peripheral Clock controller in DT. Signed-off-by: Yu Tu <redacted> --- arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ 1 file changed, 26 insertions(+)diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi index bd9c2ef83314..e7fab6e400be 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi@@ -6,6 +6,8 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> / { cpus {@@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { #clock-cells = <1>; }; + clkc_periphs: clock-controller { + compatible = "amlogic,s4-peripherals-clkc"; + reg = <0x0 0x0 0x0 0x49c>;This is broken... did you check for warnings?This is actually fine, the parent node has a ranges property: https://github.com/torvalds/linux/blob/eb7081409f94a9a8608593d0fb63a1aa3d6f95d8/arch/arm64/boot/dts/amlogic/meson-s4.dtsi#L93
The parent ranges do not change here anything. You cannot have a reg without unit address and the tools report it. No need to use reviewers for this... Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel