Thread (28 messages) 28 messages, 4 authors, 2022-12-01

Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT

From: Krzysztof Kozlowski <hidden>
Date: 2022-11-23 13:23:27
Also in: linux-amlogic, linux-clk, linux-devicetree, lkml

On 23/11/2022 12:27, Yu Tu wrote:
Hi Krzysztof,
	
On 2022/11/23 18:10, Krzysztof Kozlowski wrote:
quoted
[ EXTERNAL EMAIL ]

On 23/11/2022 03:13, Yu Tu wrote:
quoted
Added information about the S4 SOC Peripheral Clock controller in DT.

Signed-off-by: Yu Tu <redacted>
---
  arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++
  1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index bd9c2ef83314..e7fab6e400be 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -6,6 +6,8 @@
  #include <dt-bindings/interrupt-controller/irq.h>
  #include <dt-bindings/interrupt-controller/arm-gic.h>
  #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
+#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h>
  
  / {
  	cpus {
@@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 {
  				#clock-cells = <1>;
  			};
  
+			clkc_periphs: clock-controller {
+				compatible = "amlogic,s4-peripherals-clkc";
+				reg = <0x0 0x0 0x0 0x49c>;
This is broken... did you check for warnings?
Yes, i do.
You can have a look at the results of my test, as follows.

total: 0 errors, 0 warnings, 0 checks, 38 lines checked

../patch_clk_v5_1122/0004-arm64-dts-meson-add-S4-Soc-Peripheral-clock-controll.patch 
has no obvious style problems and is ready for submission.
This is a checkpatch output. I am talking about DTS broken. dtc should
warn you.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help