Thread (22 messages) 22 messages, 3 authors, 2022-05-11

Re: [PATCH v4 09/13] ARM: dts: lan966x: add MIIM nodes

From: <hidden>
Date: 2022-05-09 06:38:43
Also in: linux-devicetree, lkml

On 03.05.2022 01:41, Michael Walle wrote:
EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe

Add the MDIO controller nodes. The integrated PHYs are connected to the
second controller. This controller also takes care of the resets of the
integrated PHYs, thus it has two memory regions. The first controller
is routed to the external MDIO/MDC pins.

By default, they are disabled.

Signed-off-by: Michael Walle <redacted>
Reviewed-by: Claudiu Beznea <redacted>

quoted hunk ↗ jump to hunk
---
 arch/arm/boot/dts/lan966x.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
index 64290fb43926..0442735910da 100644
--- a/arch/arm/boot/dts/lan966x.dtsi
+++ b/arch/arm/boot/dts/lan966x.dtsi
@@ -418,6 +418,37 @@ gpio: pinctrl@e2004064 {
                        #interrupt-cells = <2>;
                };

+               mdio0: mdio@e2004118 {
+                       compatible = "microchip,lan966x-miim";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0xe2004118 0x24>;
+                       clocks = <&sys_clk>;
+                       status = "disabled";
+               };
+
+               mdio1: mdio@e200413c {
+                       compatible = "microchip,lan966x-miim";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0xe200413c 0x24>,
+                             <0xe2010020 0x4>;
+                       clocks = <&sys_clk>;
+                       status = "disabled";
+
+                       phy0: ethernet-phy@1 {
+                               reg = <1>;
+                               interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+                               status = "disabled";
+                       };
+
+                       phy1: ethernet-phy@2 {
+                               reg = <2>;
+                               interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+                               status = "disabled";
+                       };
+               };
+
                sgpio: gpio@e2004190 {
                        compatible = "microchip,sparx5-sgpio";
                        reg = <0xe2004190 0x118>;
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help