Thread (22 messages) 22 messages, 3 authors, 2022-05-11

Re: [PATCH v4 10/13] ARM: dts: lan966x: add reset switch reset node

From: <hidden>
Date: 2022-05-09 06:28:27
Also in: linux-devicetree, lkml

On 03.05.2022 01:41, Michael Walle wrote:
EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe

Add the switch reset node which will later be used by the switch driver.
The switch reset also resets the GPIO controller and the SGPIO
controller, thus it also has to be connectected to these nodes. This way
the reset will only issued once for the first device requesting the
reset.

Signed-off-by: Michael Walle <redacted>
Reviewed-by: Claudiu Beznea <redacted>

quoted hunk ↗ jump to hunk
---
 arch/arm/boot/dts/lan966x.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
index 0442735910da..7020b31322d8 100644
--- a/arch/arm/boot/dts/lan966x.dtsi
+++ b/arch/arm/boot/dts/lan966x.dtsi
@@ -391,6 +391,11 @@ watchdog: watchdog@e0090000 {
                        status = "disabled";
                };

+               cpu_ctrl: syscon@e00c0000 {
+                       compatible = "microchip,lan966x-cpu-syscon", "syscon";
+                       reg = <0xe00c0000 0x350>;
+               };
+
                can0: can@e081c000 {
                        compatible = "bosch,m_can";
                        reg = <0xe081c000 0xfc>, <0x00100000 0x4000>;
@@ -406,10 +411,20 @@ can0: can@e081c000 {
                        status = "disabled";
                };

+               reset: reset-controller@e200400c {
+                       compatible = "microchip,lan966x-switch-reset";
+                       reg = <0xe200400c 0x4>;
+                       reg-names = "gcb";
+                       #reset-cells = <1>;
+                       cpu-syscon = <&cpu_ctrl>;
+               };
+
                gpio: pinctrl@e2004064 {
                        compatible = "microchip,lan966x-pinctrl";
                        reg = <0xe2004064 0xb4>,
                            <0xe2010024 0x138>;
+                       resets = <&reset 0>;
+                       reset-names = "switch";
                        gpio-controller;
                        #gpio-cells = <2>;
                        gpio-ranges = <&gpio 0 0 78>;
@@ -453,6 +468,8 @@ sgpio: gpio@e2004190 {
                        compatible = "microchip,sparx5-sgpio";
                        reg = <0xe2004190 0x118>;
                        clocks = <&sys_clk>;
+                       resets = <&reset 0>;
+                       reset-names = "switch";
                        #address-cells = <1>;
                        #size-cells = <0>;
                        status = "disabled";
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help