Re: [PATCH v4 13/13] ARM: dts: kswitch-d10: enable networking
From: <hidden>
Date: 2022-05-09 06:38:43
Also in:
linux-devicetree, lkml
On 03.05.2022 01:41, Michael Walle wrote:
EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe Enable all the necessary network related nodes, wire the pinctrl configurations, add the PHYs and connect them to the corresponding network ports. Signed-off-by: Michael Walle <redacted>
Reviewed-by: Claudiu Beznea <redacted>
quoted hunk ↗ jump to hunk
--- ...lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts | 16 +++ .../lan966x-kontron-kswitch-d10-mmt-8g.dts | 26 +++++ .../dts/lan966x-kontron-kswitch-d10-mmt.dtsi | 97 +++++++++++++++++++ 3 files changed, 139 insertions(+)diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts index 7b12cbe11c58..0f555eb45bda 100644 --- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts +++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts@@ -76,3 +76,19 @@ fc4_b_pins: fc4-b-i2c-pins { function = "fc4_b"; }; }; + +&port2 { + phys = <&serdes 2 SERDES6G(0)>; + sfp = <&sfp0>; + managed = "in-band-status"; + phy-mode = "sgmii"; + status = "okay"; +}; + +&port3 { + phys = <&serdes 3 SERDES6G(1)>; + sfp = <&sfp1>; + managed = "in-band-status"; + phy-mode = "sgmii"; + status = "okay"; +};diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts index 4b35f6c46e7f..5feef9a59a79 100644 --- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts +++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts@@ -11,3 +11,29 @@ / { compatible = "kontron,kswitch-d10-mmt-8g", "kontron,s1921", "microchip,lan9668", "microchip,lan966"; }; + +&mdio0 { + phy2: ethernet-phy@3 { + reg = <3>; + }; + + phy3: ethernet-phy@4 { + reg = <4>; + }; +}; + +&port2 { + phys = <&serdes 2 SERDES6G(0)>; + phy-handle = <&phy2>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "okay"; +}; + +&port3 { + phys = <&serdes 3 SERDES6G(1)>; + phy-handle = <&phy3>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "okay"; +};diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi index 4c1ebb4aa5b0..4cab1b3b3b29 100644 --- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi +++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi@@ -5,6 +5,7 @@ /dts-v1/; #include "lan966x.dtsi" +#include "dt-bindings/phy/phy-lan966x-serdes.h" / { aliases {@@ -52,6 +53,12 @@ fc3_b_pins: fc3-b-pins { function = "fc3_b"; }; + miim_c_pins: miim-c-pins { + /* MDC, MDIO */ + pins = "GPIO_59", "GPIO_60"; + function = "miim_c"; + }; + sgpio_a_pins: sgpio-a-pins { /* SCK, D0, D1 */ pins = "GPIO_32", "GPIO_33", "GPIO_34";@@ -71,6 +78,92 @@ usart0_pins: usart0-pins { }; }; +&mdio0 { + pinctrl-0 = <&miim_c_pins>; + pinctrl-names = "default"; + reset-gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + clock-frequency = <2500000>; + status = "okay"; + + phy4: ethernet-phy@5 { + reg = <5>; + coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; + + phy5: ethernet-phy@6 { + reg = <6>; + coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; + + phy6: ethernet-phy@7 { + reg = <7>; + coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; + + phy7: ethernet-phy@8 { + reg = <8>; + coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; +}; + +&mdio1 { + status = "okay"; +}; + +&phy0 { + status = "okay"; +}; + +&phy1 { + status = "okay"; +}; + +&port0 { + phys = <&serdes 0 CU(0)>; + phy-handle = <&phy0>; + phy-mode = "gmii"; + status = "okay"; +}; + +&port1 { + phys = <&serdes 1 CU(1)>; + phy-handle = <&phy1>; + phy-mode = "gmii"; + status = "okay"; +}; + +&port4 { + phys = <&serdes 4 SERDES6G(2)>; + phy-handle = <&phy4>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&port5 { + phys = <&serdes 5 SERDES6G(2)>; + phy-handle = <&phy5>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&port6 { + phys = <&serdes 6 SERDES6G(2)>; + phy-handle = <&phy6>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&port7 { + phys = <&serdes 7 SERDES6G(2)>; + phy-handle = <&phy7>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&serdes { + status = "okay"; +}; + &sgpio { pinctrl-0 = <&sgpio_a_pins>, <&sgpio_b_pins>; pinctrl-names = "default";@@ -88,6 +181,10 @@ sgpio_out: gpio@1 { }; }; +&switch { + status = "okay"; +}; + &watchdog { status = "okay"; }; --2.30.2
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel