[PATCH v2 16/16] ARM: dts: ls1021a-tsn: use generic "jedec, spi-nor" compatible for flash
From: Li Yang <hidden>
Date: 2021-10-01 00:05:16
Also in:
linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
We cannot list all the possible chips used in different board revisions, just use the generic "jedec,spi-nor" compatible instead. This also fixes dtbs_check error: ['s25fl256s1', 's25fl512s', 'jedec,spi-nor'] is too long Signed-off-by: Li Yang <redacted> --- arch/arm/boot/dts/ls1021a-tsn.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts
index 8005efc5c812..ff0ffb22768b 100644
--- a/arch/arm/boot/dts/ls1021a-tsn.dts
+++ b/arch/arm/boot/dts/ls1021a-tsn.dts@@ -251,7 +251,7 @@ &qspi { flash@0 { /* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */ - compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s"; + compatible = "jedec,spi-nor"; spi-max-frequency = <20000000>; #address-cells = <1>; #size-cells = <1>;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel