Thread (34 messages) 34 messages, 7 authors, 2021-07-23

Re: [PATCH v4 11/11] perf auxtrace: Add compat_auxtrace_mmap__{read_head|write_tail}

From: "Russell King (Oracle)" <linux@armlinux.org.uk>
Date: 2021-07-13 16:15:20
Also in: linux-perf-users, lkml

On Tue, Jul 13, 2021 at 11:46:02PM +0800, Leo Yan wrote:
Hi Russell,

On Mon, Jul 12, 2021 at 03:44:11PM +0100, Russell King (Oracle) wrote:
quoted
On Sun, Jul 11, 2021 at 06:41:05PM +0800, Leo Yan wrote:
quoted
When perf runs in compat mode (kernel in 64-bit mode and the perf is in
32-bit mode), the 64-bit value atomicity in the user space cannot be
assured, E.g. on some architectures, the 64-bit value accessing is split
into two instructions, one is for the low 32-bit word accessing and
another is for the high 32-bit word.
Does this apply to 32-bit ARM code on aarch64? I would not have thought
it would, as the structure member is a __u64 and
compat_auxtrace_mmap__read_head() doesn't seem to be marking anything
as packed, so the compiler _should_ be able to use a LDRD instruction
to load the value.
I think essentially your question is relevant to the memory model.
For 32-bit Arm application on aarch64, in the Armv8 architecture
reference manual ARM DDI 0487F.c, chapter "E2.2.1
Requirements for single-copy atomicity" describes:

"LDM, LDC, LDRD, STM, STC, STRD, PUSH, POP, RFE, SRS, VLDM, VLDR, VSTM,
and VSTR instructions are executed as a sequence of word-aligned word
accesses. Each 32-bit word access is guaranteed to be single-copy
atomic. The architecture does not require subsequences of two or more
word accesses from the sequence to be single-copy atomic."
... which is an interesting statement for ARMv7 code. DDI0406C says
similar but goes on to say:

   In an implementation that includes the Large Physical Address
   Extension, LDRD and STRD accesses to 64-bit aligned locations
   are 64-bit single-copy atomic as seen by translation table
   walks and accesses to translation tables.

then states that LPAE page tables must be stored in memory that such
page tables must be in memory that is capable of supporting 64-bit
single-copy atomic accesses.

In Linux, we assume all RAM that the kernel has access to can contain
page tables. So by implication, all RAM that the kernel has access to
and exposes to userspace must be 64-bit single-copy atomic (if not,
we have a rather serious bug.)

The remaining question is whether it would be sane for LDRD and STRD
to be single-copy atomic to translation table walkers but not to other
CPUs. Since Linux expects to be able to modify the page tables from
any CPU in the system, this requirement must hold, otherwise it's going
to be a really strangely designed system.

Therefore, I put it that for Linux to operate correctly on 32-bit Arm
CPUs with LPAE, LDRD and STRD must be 64-bit single-copy atomic
inspite of what the architecture reference documentation may allow.

Now, since we allow 32-bit ARM kernels to run under KVM on ARMv8, it
would be pretty silly if this was broken on aarch64 - it would mean
such a guest would have no way to atomically update the LPAE page
tables. We know that's not true, since we can run 32-bit kernels and
userspace just fine under aarch64.

I'd be interested to hear what Catalin and Will have to say on this,
but I suspect in practice, Arm systems that are running Linux with
LPAE (ARMv7+LPAE, ARMv8) will implement LDRD and STRD with 64-bit
single-copy atomic semantics.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help